Jesse Schoch

Universal Gcode Platform

4

How does the config loading work for UGS? I get a "no firmwares found" error. Also it isn't really at all clear how to use it with g2core. Are there...

probe macro simplification

10

I continue to have a hard time being able to predict the probe movements prior to running the probe. I trashed my probe last night due to the complexity of...

end user probing testing

51

here is a long winded video of me bumbling through some testing. I didn't test edge finding prior to today. Corner finding works well, as does center finding. I'm guessing...

console enhancements

5

I understand you are already working on a 2nd window for console output. Here are some things I'd like to help out with. 1. if I run $$ in the...

production target todo list

5

If you can share what you want to get finished for the first production release I can let you know where I might be able to help.

edge finding start point image

3

Per the previous conversation in the pull request I am used to the edge finding start point being in a different location and somehow the drawing wasn't clicking for me...

enhancement: probe configurator

3

Beyond the first production release i'd like to discuss how to drive the probing UI with the attributes of the selected probe. This likely requires a probe configuration wizard of...

XY clearance cannot exceed probe depth

2

If you prefer to avoid using the edge finding offset value you may want the "XY Clearance" value to be larger than your probing distance since your probe macro starting...

use standard lathe coordinate system

2

Lathe's do not use Z for part diameter they use X. When offsets for lathe tools can be set in both X and Z the coordinate system should be changed...

beta z probe

8

I'm getting a NaN in place of the Z postion below when z probing. ``` G53G0Z-163.048 ok PM:ok G10L2P1ZNaN ```