jsb5151

MQTT discovery: temperature_unit incorrectly reported as Fahrenheit

3

I have 2 Zephyr split AC units with the AEH-W4E1 module (hismart-us is the one I got working). Everything looks good in AirCon as well as MQTT, however the readings...

Fix MQTT Discovery by defining a default/catch-all binary_sensor device_class

4

1. catch-all for unspecified device class mappings 2. remove unnecessary version_key and source_key payloads from arming command

MQTT retain flag should be True

5

I've experienced a few situations where discovery is failing because the topics simply don't show up in Mosquitto after a reconnect of the MQTT client, and this seems to be...

Fix MQTT sensor discovery device_class

8

I have a test IQP2+ with 7 configured sensors, and 3 of them are generating errors when HA auto-discovers them due to the fact that the device_class is empty. There...

Since it seems we can't pull uniquely identifiable information from the INFO packet, perhaps one way of fixing this would be to pass the panel IP address, or any other...

Format to trigger a panic is as follows: {"partition_id":0,"action":"ALARM","alarm_type":"POLICE","version":0,"nonce":"qolsys","source":"C4","token":"foobar"} or {"partition_id":0,"action":"ALARM","alarm_type":"FIRE","version":0,"nonce":"qolsys","source":"C4","token":"foobar"} or {"partition_id":0,"action":"ALARM","alarm_type":"AUXILIARY","version":0,"nonce":"qolsys","source":"C4","token":"foobar"} Tried invoking this through MQTT request but the code expects an "event" payload, not an "action" payload......

I have a few cards that have 32-bit, 40, 56 and 64-bit card numbers. - 32-bit card read is OK, but reports a slightly different number on the sensor (reads...

Sensors incorrectly report tampered conditions

6

### Before submitting this form - [X] I have checked that there hasn't been a similar issue submitted in the past - [X] I have updated the issue title to...

Conventional mode: Motorola GPS Location packets are not passed

7

Currently have a repeater & a hotspot as a testbed, both connected to the same CFNE. SU#1 is a APX8000 is transmitting on TG1 with Location Reporting (GPS) on. Generates...

Alarm & Binary Sensor integration not working: "Unknown device properties received from Control4"

10

EA-3 running 3.2.4, Qolsys IQPanel2 driver. Works fine from the C4 side. I get this in the logs: ``` 2022-01-22 13:56:36 WARNING (MainThread) [custom_components.control4.alarm_control_panel] Unknown device properties received from Control4:...