Jérôme

> have you the link of the develop-branch. > the frequency that you use https://github.com/jekhokie/raspberry-noaa-v2/blob/09c98e0bbf1af6dfae84ca78d9a78c7907545ed4/scripts/common.sh#L55

My settings: ``` METEOR_M2_3_GAIN=25.4 NOAA_xx_GAIN=19.7 RECEIVER_TYPE=rtlsdr NOAA_RECEIVER=rtl_fm METEOR_RECEIVER=satdump_live ``` using a Nooelec RTL-SDR v4 SDR with a general purpose +20dB LNA (8-2500MHz) and this DIY antenna: 

> Perhaps not enough gain which would explain the impossibility of decoding. For me it only works within a small range. A gain below 20 is too low and above...

> I believe rtlsdr has the option of specifying the device not just by device ID but also by serial `rtl_fm -help` shows no parameter, that allows to specify serial...

Maybe a fast fix could be doing a `cd ${NOAA_HOME}/tmp` and using `predict -t ./orbit.tle` (without the full path)

Ja, sieht komisch aus. Liegt vielleicht wirklich an einer zu alten Version > PS: wie kann ich eigentlich in Debmatic die version des addons herausbekommen? Da frag mal Alex. Ich...

I think it is fixed. As I can see, all notifications (slack, twitter, ...) are now done _after_ getting the actual `pass_id`.

You can try it with hardware debouncing, (i.e. google for "debounce reed switch")

It's not a problem of the sketch. Maybe a problem in Raspberrymatic or so. "Energy Counter - Central" is calculated directly within the CCU

Hi, _müsste_ Bobuino sein. Der Sketch ist 5 Jahre alt... ich hab da keinen Plan mehr von 😄