raspberry-noaa-v2
raspberry-noaa-v2 copied to clipboard
jekhokie
Meteor2
Hello,
With a fresh install, I decode without problem NOAA 18 & 19 but for meteor nothing :( in the wav only silent , there is no noise, nothing.
Thanks for your help
12-09-2023 18:04 /home/pi/raspberry-noaa-v2/scripts/receive_meteor.sh INFO : The system have enough space to store a Meteor pass on RAM 12-09-2023 18:04 /home/pi/raspberry-noaa-v2/scripts/receive_meteor.sh INFO : Free : 761 ; Required : 600 12-09-2023 18:04 /home/pi/raspberry-noaa-v2/scripts/receive_meteor.sh INFO : Direction Northbound 12-09-2023 18:04 /home/pi/raspberry-noaa-v2/scripts/receive_meteor.sh INFO : I'll flip this image pass because FLIP_METEOR_IMG is set to true and PASS_DIRECTION is Northbound 12-09-2023 18:04 /home/pi/raspberry-noaa-v2/scripts/receive_meteor.sh INFO : Starting rtl_fm record /bin/bash: warning: setlocale: LC_ALL: cannot change locale (fr_FR) INFO : Recording at 137.1000 MHz... 12-09-2023 18:04 /home/pi/raspberry-noaa-v2/scripts/audio_processors/meteor_record_rtl_fm.sh INFO : Recording at 137.1000 MHz... Found 1 device(s): 0: Realtek, RTL2838UHIDIR, SN:
Using device 0: Generic RTL2832U OEM Found Fitipower FC0013 tuner Tuner gain set to 19.70 dB. Tuned to 137388000 Hz. Oversampling input by: 4x. Oversampling output by: 1x. Buffer size: 7.11ms Sampling at 1152000 S/s. Output at 288000 Hz. Allocating 15 zero-copy buffers Signal caught, exiting!
User cancel, exiting... 12-09-2023 18:19 /home/pi/raspberry-noaa-v2/scripts/receive_meteor.sh INFO : Demodulation in progress (QPSK) /bin/bash: warning: setlocale: LC_ALL: cannot change locale (fr_FR) Input: /var/ramfs/METEOR-M-2-20230912-180445.wav, output: /home/pi/raspberry-noaa-v2/tmp/meteor/METEOR-M-2-20230912-180445.qpsk Demodulator initialized
( 0.0%) Carrier: +0.0 Hz, Symbol rate: 72000.0 Hz, Locked: No
( 1.6%) Carrier: -3108.8 Hz, Symbol rate: 72001.5 Hz, Locked: No
( 3.1%) Carrier: -1886.3 Hz, Symbol rate: 72003.9 Hz, Locked: No
( 4.7%) Carrier: +102.2 Hz, Symbol rate: 71998.5 Hz, Locked: No
( 6.3%) Carrier: +2482.3 Hz, Symbol rate: 72001.7 Hz, Locked: No
( 7.8%) Carrier: +2024.4 Hz, Symbol rate: 72005.8 Hz, Locked: No
( 9.4%) Carrier: -39.7 Hz, Symbol rate: 72003.8 Hz, Locked: No
( 10.9%) Carrier: -1788.6 Hz, Symbol rate: 72008.6 Hz, Locked: No
( 12.5%) Carrier: -2845.9 Hz, Symbol rate: 72011.1 Hz, Locked: No
( 14.1%) Carrier: -612.8 Hz, Symbol rate: 72010.1 Hz, Locked: No
( 15.6%) Carrier: +1662.1 Hz, Symbol rate: 72009.1 Hz, Locked: No
( 17.2%) Carrier: +3150.5 Hz, Symbol rate: 72006.8 Hz, Locked: No
( 18.7%) Carrier: +154.3 Hz, Symbol rate: 72007.5 Hz, Locked: No
( 20.3%) Carrier: -1924.2 Hz, Symbol rate: 72002.2 Hz, Locked: No
( 21.9%) Carrier: -2492.3 Hz, Symbol rate: 71997.1 Hz, Locked: No
( 23.4%) Carrier: +206.7 Hz, Symbol rate: 71996.5 Hz, Locked: No
( 25.0%) Carrier: +1922.4 Hz, Symbol rate: 71999.0 Hz, Locked: Yes
( 26.5%) Carrier: +1461.5 Hz, Symbol rate: 71999.4 Hz, Locked: No
( 28.1%) Carrier: -429.6 Hz, Symbol rate: 72002.8 Hz, Locked: No
( 29.6%) Carrier: -2233.5 Hz, Symbol rate: 72004.5 Hz, Locked: No
( 31.2%) Carrier: -2929.5 Hz, Symbol rate: 72012.8 Hz, Locked: No
( 32.8%) Carrier: -1045.1 Hz, Symbol rate: 72012.1 Hz, Locked: No
( 34.3%) Carrier: +584.9 Hz, Symbol rate: 72017.6 Hz, Locked: No
( 35.9%) Carrier: +2978.2 Hz, Symbol rate: 72011.0 Hz, Locked: No
( 37.5%) Carrier: +1277.9 Hz, Symbol rate: 72009.2 Hz, Locked: No
( 39.1%) Carrier: -1847.0 Hz, Symbol rate: 72014.9 Hz, Locked: No
( 40.6%) Carrier: -3053.9 Hz, Symbol rate: 72016.1 Hz, Locked: No
( 42.2%) Carrier: -1409.3 Hz, Symbol rate: 72016.9 Hz, Locked: No
( 43.8%) Carrier: +176.1 Hz, Symbol rate: 72008.3 Hz, Locked: No
( 45.4%) Carrier: +2006.3 Hz, Symbol rate: 72008.2 Hz, Locked: No
( 46.9%) Carrier: +2783.2 Hz, Symbol rate: 72013.8 Hz, Locked: No
( 48.5%) Carrier: +677.4 Hz, Symbol rate: 72017.2 Hz, Locked: No
( 49.1%) Carrier: +2372.6 Hz, Symbol rate: 72013.4 Hz, Locked: No
( 50.6%) Carrier: +1962.3 Hz, Symbol rate: 72000.1 Hz, Locked: No
( 52.2%) Carrier: -862.2 Hz, Symbol rate: 72001.1 Hz, Locked: Yes
( 53.8%) Carrier: -3067.6 Hz, Symbol rate: 72005.9 Hz, Locked: No
( 55.3%) Carrier: -1195.1 Hz, Symbol rate: 72003.2 Hz, Locked: No
( 56.9%) Carrier: +1669.2 Hz, Symbol rate: 72007.9 Hz, Locked: Yes
( 58.5%) Carrier: +1015.0 Hz, Symbol rate: 72008.7 Hz, Locked: No
( 60.0%) Carrier: -1044.2 Hz, Symbol rate: 72000.2 Hz, Locked: No
( 61.6%) Carrier: -3080.3 Hz, Symbol rate: 71990.4 Hz, Locked: No
( 63.1%) Carrier: -1988.8 Hz, Symbol rate: 71986.1 Hz, Locked: No
( 64.7%) Carrier: +443.8 Hz, Symbol rate: 71984.2 Hz, Locked: No
( 66.3%) Carrier: +2718.0 Hz, Symbol rate: 71984.7 Hz, Locked: No
( 67.8%) Carrier: +2002.7 Hz, Symbol rate: 71985.7 Hz, Locked: No
( 69.4%) Carrier: +337.7 Hz, Symbol rate: 71988.4 Hz, Locked: No
( 71.0%) Carrier: -2366.2 Hz, Symbol rate: 71988.4 Hz, Locked: No
( 72.6%) Carrier: -670.9 Hz, Symbol rate: 71985.6 Hz, Locked: No
( 73.4%) Carrier: -284.0 Hz, Symbol rate: 71993.1 Hz, Locked: No
( 74.9%) Carrier: -2165.3 Hz, Symbol rate: 72002.7 Hz, Locked: No
( 76.5%) Carrier: -3137.7 Hz, Symbol rate: 72004.9 Hz, Locked: No
( 78.1%) Carrier: -1272.5 Hz, Symbol rate: 71998.4 Hz, Locked: No
( 79.7%) Carrier: +1948.7 Hz, Symbol rate: 71995.1 Hz, Locked: No
( 81.3%) Carrier: +3352.4 Hz, Symbol rate: 71991.0 Hz, Locked: No
( 82.8%) Carrier: +1545.1 Hz, Symbol rate: 71994.2 Hz, Locked: No
( 84.4%) Carrier: -634.5 Hz, Symbol rate: 71992.1 Hz, Locked: No
( 86.0%) Carrier: -2449.1 Hz, Symbol rate: 71989.3 Hz, Locked: No
( 87.6%) Carrier: -631.3 Hz, Symbol rate: 71990.4 Hz, Locked: No
( 89.2%) Carrier: +872.0 Hz, Symbol rate: 71997.1 Hz, Locked: No
( 90.7%) Carrier: +3200.9 Hz, Symbol rate: 71993.2 Hz, Locked: No
( 92.3%) Carrier: +1091.1 Hz, Symbol rate: 71992.8 Hz, Locked: No
( 93.9%) Carrier: -1479.7 Hz, Symbol rate: 71991.8 Hz, Locked: No
( 95.5%) Carrier: -3042.8 Hz, Symbol rate: 71994.5 Hz, Locked: No
( 97.1%) Carrier: +968.9 Hz, Symbol rate: 71993.2 Hz, Locked: No
( 98.1%) Carrier: -731.2 Hz, Symbol rate: 71992.2 Hz, Locked: No
( 99.7%) Carrier: -2374.1 Hz, Symbol rate: 71994.5 Hz, Locked: No
12-09-2023 18:21 /home/pi/raspberry-noaa-v2/scripts/receive_meteor.sh INFO : Producing spectrogram
/bin/bash: warning: setlocale: LC_ALL: cannot change locale (fr_FR)
ffmpeg version 4.3.6-0+deb11u1+rpt5 Copyright (c) 2000-2023 the FFmpeg developers
built with gcc 10 (Raspbian 10.2.1-6+rpi1)
configuration: --prefix=/usr --extra-version=0+deb11u1+rpt5 --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-mmal --enable-neon --enable-rpi --enable-v4l2-request --enable-libudev --enable-epoxy --enable-pocketsphinx --enable-libdc1394 --enable-libdrm --enable-vout-drm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --enable-shared --libdir=/usr/lib/arm-linux-gnueabihf --cpu=arm1176jzf-s --arch=arm
WARNING: library configuration mismatch
avutil configuration: --prefix=/usr --extra-version=0+deb11u1+rpt5 --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-mmal --enable-neon --enable-rpi --enable-v4l2-request --enable-libudev --enable-epoxy --enable-pocketsphinx --enable-libdc1394 --enable-libdrm --enable-vout-drm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
avcodec configuration: --prefix=/usr --extra-version=0+deb11u1+rpt5 --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-mmal --enable-neon --enable-rpi --enable-v4l2-request --enable-libudev --enable-epoxy --enable-pocketsphinx --enable-libdc1394 --enable-libdrm --enable-vout-drm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
avformat configuration: --prefix=/usr --extra-version=0+deb11u1+rpt5 --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-mmal --enable-neon --enable-rpi --enable-v4l2-request --enable-libudev --enable-epoxy --enable-pocketsphinx --enable-libdc1394 --enable-libdrm --enable-vout-drm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
avdevice configuration: --prefix=/usr --extra-version=0+deb11u1+rpt5 --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-mmal --enable-neon --enable-rpi --enable-v4l2-request --enable-libudev --enable-epoxy --enable-pocketsphinx --enable-libdc1394 --enable-libdrm --enable-vout-drm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
avfilter configuration: --prefix=/usr --extra-version=0+deb11u1+rpt5 --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-mmal --enable-neon --enable-rpi --enable-v4l2-request --enable-libudev --enable-epoxy --enable-pocketsphinx --enable-libdc1394 --enable-libdrm --enable-vout-drm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
avresample configuration: --prefix=/usr --extra-version=0+deb11u1+rpt5 --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-mmal --enable-neon --enable-rpi --enable-v4l2-request --enable-libudev --enable-epoxy --enable-pocketsphinx --enable-libdc1394 --enable-libdrm --enable-vout-drm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
swscale configuration: --prefix=/usr --extra-version=0+deb11u1+rpt5 --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-mmal --enable-neon --enable-rpi --enable-v4l2-request --enable-libudev --enable-epoxy --enable-pocketsphinx --enable-libdc1394 --enable-libdrm --enable-vout-drm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
swresample configuration: --prefix=/usr --extra-version=0+deb11u1+rpt5 --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-mmal --enable-neon --enable-rpi --enable-v4l2-request --enable-libudev --enable-epoxy --enable-pocketsphinx --enable-libdc1394 --enable-libdrm --enable-vout-drm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
postproc configuration: --prefix=/usr --extra-version=0+deb11u1+rpt5 --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-mmal --enable-neon --enable-rpi --enable-v4l2-request --enable-libudev --enable-epoxy --enable-pocketsphinx --enable-libdc1394 --enable-libdrm --enable-vout-drm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
libavutil 56. 51.100 / 56. 51.100
libavcodec 58. 91.100 / 58. 91.100
libavformat 58. 45.100 / 58. 45.100
libavdevice 58. 10.100 / 58. 10.100
libavfilter 7. 85.100 / 7. 85.100
libavresample 4. 0. 0 / 4. 0. 0
libswscale 5. 7.100 / 5. 7.100
libswresample 3. 7.100 / 3. 7.100
libpostproc 55. 7.100 / 55. 7.100
Guessed Channel Layout for Input Stream #0.0 : stereo
Input #0, wav, from '/var/ramfs/METEOR-M-2-20230912-180445.wav':
Duration: 00:15:40.26, bitrate: 3072 kb/s
Stream #0:0: Audio: pcm_s16le ([1][0][0][0] / 0x0001), 96000 Hz, stereo, s16, 3072 kb/s
Stream mapping:
Stream #0:0 (pcm_s16le) -> showspectrumpic
showspectrumpic -> Stream #0:0 (png)
Press [q] to stop, [?] for help
Output #0, image2, to '/home/pi/raspberry-noaa-v2/tmp/temp_spectrogram.png':
Metadata:
encoder : Lavf58.45.100
Stream #0:0: Video: png, rgb24, 698x928 [SAR 1:1 DAR 349:464], q=2-31, 200 kb/s, 93.75 fps, 93.75 tbn, 93.75 tbc
Metadata:
encoder : Lavc58.91.100 png
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 0 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 1 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x
frame= 1 fps=0.0 q=-0.0 Lsize=N/A time=00:00:00.01 bitrate=N/A speed=3.61e-05x
video:56kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown
ffmpeg version 4.3.6-0+deb11u1+rpt5 Copyright (c) 2000-2023 the FFmpeg developers
built with gcc 10 (Raspbian 10.2.1-6+rpi1)
configuration: --prefix=/usr --extra-version=0+deb11u1+rpt5 --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-mmal --enable-neon --enable-rpi --enable-v4l2-request --enable-libudev --enable-epoxy --enable-pocketsphinx --enable-libdc1394 --enable-libdrm --enable-vout-drm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --enable-shared --libdir=/usr/lib/arm-linux-gnueabihf --cpu=arm1176jzf-s --arch=arm
WARNING: library configuration mismatch
avutil configuration: --prefix=/usr --extra-version=0+deb11u1+rpt5 --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-mmal --enable-neon --enable-rpi --enable-v4l2-request --enable-libudev --enable-epoxy --enable-pocketsphinx --enable-libdc1394 --enable-libdrm --enable-vout-drm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
avcodec configuration: --prefix=/usr --extra-version=0+deb11u1+rpt5 --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-mmal --enable-neon --enable-rpi --enable-v4l2-request --enable-libudev --enable-epoxy --enable-pocketsphinx --enable-libdc1394 --enable-libdrm --enable-vout-drm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
avformat configuration: --prefix=/usr --extra-version=0+deb11u1+rpt5 --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-mmal --enable-neon --enable-rpi --enable-v4l2-request --enable-libudev --enable-epoxy --enable-pocketsphinx --enable-libdc1394 --enable-libdrm --enable-vout-drm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
avdevice configuration: --prefix=/usr --extra-version=0+deb11u1+rpt5 --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-mmal --enable-neon --enable-rpi --enable-v4l2-request --enable-libudev --enable-epoxy --enable-pocketsphinx --enable-libdc1394 --enable-libdrm --enable-vout-drm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
avfilter configuration: --prefix=/usr --extra-version=0+deb11u1+rpt5 --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-mmal --enable-neon --enable-rpi --enable-v4l2-request --enable-libudev --enable-epoxy --enable-pocketsphinx --enable-libdc1394 --enable-libdrm --enable-vout-drm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
avresample configuration: --prefix=/usr --extra-version=0+deb11u1+rpt5 --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-mmal --enable-neon --enable-rpi --enable-v4l2-request --enable-libudev --enable-epoxy --enable-pocketsphinx --enable-libdc1394 --enable-libdrm --enable-vout-drm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
swscale configuration: --prefix=/usr --extra-version=0+deb11u1+rpt5 --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-mmal --enable-neon --enable-rpi --enable-v4l2-request --enable-libudev --enable-epoxy --enable-pocketsphinx --enable-libdc1394 --enable-libdrm --enable-vout-drm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
swresample configuration: --prefix=/usr --extra-version=0+deb11u1+rpt5 --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-mmal --enable-neon --enable-rpi --enable-v4l2-request --enable-libudev --enable-epoxy --enable-pocketsphinx --enable-libdc1394 --enable-libdrm --enable-vout-drm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
postproc configuration: --prefix=/usr --extra-version=0+deb11u1+rpt5 --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-mmal --enable-neon --enable-rpi --enable-v4l2-request --enable-libudev --enable-epoxy --enable-pocketsphinx --enable-libdc1394 --enable-libdrm --enable-vout-drm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
libavutil 56. 51.100 / 56. 51.100
libavcodec 58. 91.100 / 58. 91.100
libavformat 58. 45.100 / 58. 45.100
libavdevice 58. 10.100 / 58. 10.100
libavfilter 7. 85.100 / 7. 85.100
libavresample 4. 0. 0 / 4. 0. 0
libswscale 5. 7.100 / 5. 7.100
libswresample 3. 7.100 / 3. 7.100
libpostproc 55. 7.100 / 55. 7.100
Input #0, png_pipe, from '/home/pi/raspberry-noaa-v2/tmp/temp_spectrogram.png':
Duration: N/A, bitrate: N/A
Stream #0:0: Video: png, rgb24(pc), 698x928 [SAR 1:1 DAR 349:464], 25 tbr, 25 tbn, 25 tbc
Stream mapping:
Stream #0:0 -> #0:0 (png (native) -> png (native))
Press [q] to stop, [?] for help
[Parsed_drawtext_0 @ 0x14e3b50] Using "/usr/share/fonts/truetype/ttf-bitstream-vera/Vera.ttf"
Output #0, image2, to '/srv/images/METEOR-M-2-20230912-180445-spectrogram.png':
Metadata:
encoder : Lavf58.45.100
Stream #0:0: Video: png, rgb24, 698x928 [SAR 1:1 DAR 349:464], q=2-31, 200 kb/s, 25 fps, 25 tbn, 25 tbc
Metadata:
encoder : Lavc58.91.100 png
frame= 1 fps=0.0 q=-0.0 Lsize=N/A time=00:00:00.04 bitrate=N/A speed=0.0614x
video:59kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown
/bin/bash: warning: setlocale: LC_ALL: cannot change locale (fr_FR)
12-09-2023 18:27 /home/pi/raspberry-noaa-v2/scripts/receive_meteor.sh INFO : Free memory : 429 ; Available memory : 466 ; Total RAMFS usage : 345M
12-09-2023 18:27 /home/pi/raspberry-noaa-v2/scripts/receive_meteor.sh INFO : Deleting audio files
12-09-2023 18:27 /home/pi/raspberry-noaa-v2/scripts/receive_meteor.sh INFO : Running MeteorDemod to demodulate QPSK file, rectify (spread) images, create heat map and composites and convert them to JPG
Pos:2939792 | Phase:6 | synch:3e9ecd90 | RS: (-1, -1, -1, -1)
Pos:24947076 | Phase:7 | synch:a09dd93b | RS: (-1, -1, -1, -1)
Pos:32155382 | Phase:3 | synch:5af21db2 | RS: (-1, -1, -1, -1)
Pos:60064311 | Phase:1 | synch:1d85a3b8 | RS: (-1, -1, -1, -1)
Pos:78271425 | Phase:5 | synch:12adee6d | RS: (-1, -1, -1, -1)
Pos:86281848 | Phase:0 | synch:f1647d91 | RS: (-1, -1, -1, -1)
Pos:102935928 | Phase:6 | synch:dca0025f | RS: (-1, -1, -1, -1)
Pos:111082832 | Phase:4 | synch:5bcb3e9e | RS: (-1, -1, -1, -1)
Decoded packets:0
No data received, exiting...
12-09-2023 18:38 /home/pi/raspberry-noaa-v2/scripts/receive_meteor.sh ERROR : Receiver type 'rtl_fm' not valid
12-09-2023 18:38 /home/pi/raspberry-noaa-v2/scripts/receive_meteor.sh INFO : Producing polar graph of azimuth and elevation for pass
12-09-2023 18:38 /home/pi/raspberry-noaa-v2/scripts/receive_meteor.sh INFO : Producing polar graph of direction for pass
convert: unable to open image spread_*.jpg': No such file or directory @ error/blob.c/OpenBlob/2924. convert: no images defined spread_.jpg' @ error/convert.c/ConvertImageCommand/3229.
12-09-2023 18:38 /home/pi/raspberry-noaa-v2/scripts/receive_meteor.sh INFO : Annotating images and creating thumbnails
/bin/bash: warning: setlocale: LC_ALL: cannot change locale (fr_FR)
Loading page (1/2)
[> ] 0%
[======> ] 10%
[=========> ] 15%
[=============> ] 23%
[============================================================] 100%
Rendering (2/2)
[> ] 0%
[===============> ] 25%
[============================================================] 100%
Done
convert: unable to open image *.jpg': No such file or directory @ error/blob.c/OpenBlob/2924. convert: image sequence is required -composite' @ error/mogrify.c/MogrifyImageList/8003.
convert: no images defined *.jpg' @ error/convert.c/ConvertImageCommand/3229. /bin/bash: warning: setlocale: LC_ALL: cannot change locale (fr_FR) convert: unable to open image .jpg': No such file or directory @ error/blob.c/OpenBlob/2924.
convert: no images defined `*-thumb-122-rectified.jpg' @ error/convert.c/ConvertImageCommand/3229.
12-09-2023 18:38 /home/pi/raspberry-noaa-v2/scripts/receive_meteor.sh ERROR : Did not get a successful .bmp image - stopping processing
12-09-2023 18:38 /home/pi/raspberry-noaa-v2/scripts/receive_meteor.sh INFO : Total processing time: 00:34.55
Could not open input file
If you have pulled code from the main branch, then it's trying to receive Meteor M2. Meteor M2 is not transmitting LRPT, maybe nothing at all actually, it's broken. Meteor M2-3 has come online and is working, and they are working on supporting it in the beta-development branch.
Ok, thanks for this info ... To test the branch beta, have you the address git for this ?
With a new fresh install, I decode without problem NOAA 18 & 19 but for meteor nothing :( in the wav only silent , there is no noise, nothing for [METEOR-M2 3]
Carrier: -357.64Hz Lock detector: 0.23 isLocked: 0 OutputSize: 125.32Mb Progress: 99.98%
Carrier: -359.00Hz Lock detector: 0.23 isLocked: 0 OutputSize: 125.33Mb Progress: 99.99%
Carrier: -360.14Hz Lock detector: 0.23 isLocked: 0 OutputSize: 125.34Mb Progress: 100.00%
SyncWordFound:1 | Decoded Packets:0 | Current Pos:11851436 | Phase:1 | synch:912b3328 | RS: (-1, -1, -1, -1)
SyncWordFound:2 | Decoded Packets:0 | Current Pos:14187304 | Phase:6 | synch:a99f5c90 | RS: (-1, -1, -1, -1)
SyncWordFound:3 | Decoded Packets:0 | Current Pos:16010125 | Phase:10 | synch:69694843 | RS: (-1, -1, -1, -1)
SyncWordFound:4 | Decoded Packets:0 | Current Pos:16075304 | Phase:5 | synch:dc5b3a6f | RS: (-1, -1, -1, -1)
SyncWordFound:5 | Decoded Packets:0 | Current Pos:19818319 | Phase:6 | synch:d8cf6772 | RS: (-1, -1, -1, -1)
SyncWordFound:6 | Decoded Packets:0 | Current Pos:19847137 | Phase:9 | synch:186982d5 | RS: (-1, -1, -1, -1)
SyncWordFound:7 | Decoded Packets:0 | Current Pos:20579444 | Phase:0 | synch:f87b51db | RS: (-1, -1, -1, -1)
SyncWordFound:8 | Decoded Packets:0 | Current Pos:21672634 | Phase:0 | synch:2b5186a0 | RS: (-1, -1, -1, -1)
SyncWordFound:9 | Decoded Packets:0 | Current Pos:35142491 | Phase:6 | synch:ed6f07e | RS: (-1, -1, -1, -1)
SyncWordFound:10 | Decoded Packets:0 | Current Pos:50647238 | Phase:0 | synch:faae5ec6 | RS: (-1, -1, -1, -1)
SyncWordFound:11 | Decoded Packets:0 | Current Pos:52591160 | Phase:5 | synch:88a7b17d | RS: (-1, -1, -1, -1)
SyncWordFound:12 | Decoded Packets:0 | Current Pos:57227135 | Phase:14 | synch:beae66f9 | RS: (-1, -1, -1, -1)
SyncWordFound:13 | Decoded Packets:0 | Current Pos:58499710 | Phase:0 | synch:37432f88 | RS: (-1, -1, -1, -1)
SyncWordFound:14 | Decoded Packets:0 | Current Pos:60963395 | Phase:9 | synch:b98e5277 | RS: (-1, -1, -1, -1)
SyncWordFound:15 | Decoded Packets:0 | Current Pos:81549925 | Phase:7 | synch:7682a37d | RS: (-1, -1, -1, -1)
SyncWordFound:16 | Decoded Packets:0 | Current Pos:121631862 | Phase:4 | synch:dbcf855f | RS: (-1, -1, -1, -1)
SyncWordFound:17 | Decoded Packets:0 | Current Pos:130961760 | Phase:4 | synch:5c8266d7 | RS: (-1, -1, -1, -1)
No data received, try to make composite images
Generate composite images
Generate composite images done
convert: unable to open image spread_*.jpg': No such file or directory @ error/blob.c/OpenBlob/2924. convert: no images defined spread_.jpg' @ error/convert.c/ConvertImageCommand/3229.
Loading page (1/2)
[> ] 0%
[======> ] 10%
[=========> ] 15%
[=============> ] 23%
[============================================================] 100%
Rendering (2/2)
[> ] 0%
[===============> ] 25%
[============================================================] 100%
Done
convert: unable to open image *.jpg': No such file or directory @ error/blob.c/OpenBlob/2924. convert: image sequence is required -composite' @ error/mogrify.c/MogrifyImageList/8003.
convert: no images defined /srv/images/METEOR-M2-3-20230915-112606-*.jpg' @ error/convert.c/ConvertImageCommand/3229. convert: unable to open image /srv/images/METEOR-M2-3-20230915-112606-.jpg': No such file or directory @ error/blob.c/OpenBlob/2924.
convert: no images defined `/srv/images/thumb/METEOR-M2-3-20230915-112606-*.jpg' @ error/convert.c/ConvertImageCommand/3229.
15-09-2023 12:14 /home/pi/raspberry-noaa-v2/scripts/receive_meteor.sh INFO : Deleting audio files
15-09-2023 12:14 /home/pi/raspberry-noaa-v2/scripts/receive_meteor.sh INFO : No images found, not pushing anything
15-09-2023 12:14 /home/pi/raspberry-noaa-v2/scripts/receive_meteor.sh INFO : Total processing time: 00:48.30
METEOR-M2-3 decoding works for me, using the develop-branch and satdump_live.
With gnuradio I had no success at all.
Hi, Thanks for this, it's possible to send me the frequency that you use 137.1 or 137.9 ? have you the link of the develop-branch. For me actually used the .img of https://qsl.net/ve3elb/RaspiNOAA/ ond rtl_sdl .... I'll test gnuradio, perhasp it's better ...
have you the link of the develop-branch.
the frequency that you use
https://github.com/jekhokie/raspberry-noaa-v2/blob/09c98e0bbf1af6dfae84ca78d9a78c7907545ed4/scripts/common.sh#L55
Many thanks for all informations. It's possible to send me your config/settings.yml to compare with mine to find where is my mistake ....
have you the link of the develop-branch.
> the frequency that you use
https://github.com/jekhokie/raspberry-noaa-v2/blob/09c98e0bbf1af6dfae84ca78d9a78c7907545ed4/scripts/common.sh#L55
ok, I'm test a new install of this branch, meteor pass at 12h05 local time .... I hope a good result ;)
Go to the raspberry-noaa-v2 folder and run git checkout beta-development. If it complains about the config/settings.yml file, delete it and run the git command again. Edit settings.yml to match your setup and run the install_and_upgrade.sh script again.
Hi, I wanted to have a config file that works correctly for someone and adapt it if necessary for my needs. For the moment I receive the NOAA VERY WELL but for Meteor the wav is dead silence, I don't understand why, that's why I asked for help...
Can you share a sample NOAA image? Meteor is a bit harder to receive, has lower signal strength. Try to receive Meteor manually using your laptop and finding the best gain then set your Meteor gain to that value.
For the moment, following the advice of jp112sdl, I have installed the development branch and I am in the process of setting it up correctly. An image of NOAA19 is in progress, I think I can send it to you as soon as it is finished processing. For Meteor I have dead silence, not even noise, that's why I'm asking questions, and above all I don't yet have all the knowledge to solve this problem.
for the moment, yes, but, it's a fresh install from two hours ;) in 40 minutes I have a meteor passage, do you have any advice for reception because I am currently with: receiver_type: 'rtlsdr' noaa_receiver: 'rtl_fm' meteor_receiver: 'rtl_fm'
My settings:
METEOR_M2_3_GAIN=25.4
NOAA_xx_GAIN=19.7
RECEIVER_TYPE=rtlsdr
NOAA_RECEIVER=rtl_fm
METEOR_RECEIVER=satdump_live
using a Nooelec RTL-SDR v4 SDR with a general purpose +20dB LNA (8-2500MHz) and this DIY antenna:
Thanks jp112sdl, I will test your parameters, my problem with satdump_live is that I don't have any processing of the sound file behind or it doesn't process it live....here is my qfh ~15db + 18db 137mhz preamp and Realtek Semiconductor Corp. RTL2838 DVB-T.
For the last meteor passages it is always a failure. Perhaps not enough gain which would explain the impossibility of decoding. We will continue the investigations and try to improve and recover db in reception....
Perhaps not enough gain which would explain the impossibility of decoding.
For me it only works within a small range. A gain below 20 is too low and above 29 is too much.
No, NOAA works very well but Meteor nothing. I choise the pass with max elevation, and I've test with rtl_fm and satdump_live. If you are a ideas ;)
It's normal that noaa file wav have ~12Mo with sound and meteor wav have 350Mo and this a silent with no sound or noise .?
Yes, it is. Meteor is digital signal and will sound like noise.
On 5 October 2023 22:24:06 CEST, Jean-Luc @.***> wrote:
It's normal that noaa file wav have ~12Mo with sound and meteor wav have 350Mo and this a silent with no sound or noise .?
-- Reply to this email directly or view it on GitHub: https://github.com/jekhokie/raspberry-noaa-v2/issues/708#issuecomment-1749590927 You are receiving this because you commented.
Message ID: @.***> -- S poštovanjem, Mihajlo Petković
Yeah !!! After many many many parameters and log analyse MY 1er meteor jpg !!!! nothing modify with hard configuration, only I choise to use gnuradio to create the wav. Many thanks all that help me to resolved this .... Just a last question, it's possible to impose a Aos and Los to jpg image and cut the beginning et last of image to purge noise with minimal degree..