jonwienke

[NCP_DodecahedronSphere.zip](https://github.com/user-attachments/files/16450942/NCP_DodecahedronSphere.zip) Here's the other type of Cura project file. Let me know if you need anything else.

I tried adjusting all of the support interface settings (turning support interface floor on and off, adjusting thickness, etc) and zeroed out every support distance setting I could find, and...

 Another thing I noticed duting printing is all the little flecks of support at the corners of the support interface. The printer wastes a bunch of time...

> I suspect this may be related to multiple extruders as my single-extruder setup didn't show the same issue. Unfortunately multi-extruder stuff is well and truly outside of my knowledge...

> Another thing I noticed duting printing is all the little flecks of support at the corners of the support interface. The printer wastes a bunch of time hopping around...

Thanks for looking into it. Making all the layer heights the same makes some of the random specks go away (they merge into support infill lines), but not all. The...

One more clue: Changing **Support Distance Priority** from **Z overrides X/Y** to **X/Y Overrides Z** seems to make the bottom gap issue go away. So that's something glitched in code...

You've completely missed the point here. The order of the gcode commands is 100% the problem here, not the brand of printer or the firmware version. The **M135 T0/T1** command...

Side note: It would be preferable for the Prime Tower to use the same coordinate system as models. It's confusing when the Y axis values are opposite everything else, and...

_It would be nice to be able to just drag and drop the prime tower as well. I don't think it's a mesh though, just a shadow that Cura sticks...