jonathanschneider

Update description of SwitchMode 3–6

5

These modes evaluate either a rising or a falling edge. The respectively other edge has no effect but the description suggests otherwise.

Adjustments for auroCOMPACT

2

For auroCOMPACT devices (0010009351 and 0010009352) the wrong configuration files is picked. This pull requests fixes that but might break the automatic picking for other devices. I am not sure...

scanconfig picks wrong CSV

4

Hello, I have a Vaillant heater with the article number 0010009351. Looking at [08.bai.HW7401.csv](https://github.com/john30/ebusd-configuration/blob/cf37c58578857a723a14871a50feb6c5bdd53cd8/ebusd-2.1.x/de/vaillant/08.bai.csv), I would assume that bai.0010003886.inc gets picked because of [line 8](https://github.com/john30/ebusd-configuration/blob/cf37c58578857a723a14871a50feb6c5bdd53cd8/ebusd-2.1.x/de/vaillant/08.bai.csv#L8). Instead bai.0010006101.inc gets picked because...

Fix comment for d.03 and d.04

Misinterpretation of kd and kp when using three decimal places

1

When using the expert mode in the hardware setup, BierBot interprets both "," and "." as decimal points. This is good, as it's less prone to user error. However, when...

Can't use Beer Profile or Beer Constant with only one temperature sensor

2

I am running V4.4 on an ESP32 device and have one temperature sensor connected to it. I set up the temperature sensor as "Beer Temp" but BrewPiLess will remain idle...

Support for Sonoff TH Elite 20A and TH Origin 20A

1

This PR adds support for Sonoff TH Elite 20A and TH Origin 20A which use a double-coil latching relay. The pins to control the relay are hardcoded since they're defined...

Sonoff TH Origin

6

Hello, I am trying to use BrewPiLess on a Sonoff TH Origin which has an ESP32 built in. After flashing the device and restarting I can't find the AP. I've...