jonathanschneider
jonathanschneider
@stefanbode this is starting a whole nother discussion but the state of the button in the resting or default position depends on the circuit. Saying that it's 1 or 0...
> So, I think the logic state should remain in the docs and we can add the relationship with the electrical state as a note if you want. Of course...
Thanks! That was a great hint because neither the logs nor the `ebusctl scan 08` output the product ID. All I get is `08;Vaillant;BAI00;0518;7401;;;;;;;` and that would explain why 08.bai.csv...
OK, here's my attempt to fix the issue: #401
Related to issue #400
Thank you! Your solution is so much more elegant than what I had started... Unfortunately the 20A versions don't have two relays but one bi-stable relay and two pins to...
That's exactly the resource I've been using... 😂
That might work for some time but if the device was unplugged while the relay was activated it would start cooling when plugged in again even when it shouldn't.
The flash size is 4MB, so `board = esp32dev` should be right. I can figure out the PINs. Would the wrong PINs keep the device from booting though?
I figured out my problem. Flashing one of the ESP32 envs the ESP was stuck searching for an LCD. The Sonoff TH Origin doesn't have one. I combined the existing...