Jochen Vleugels
Jochen Vleugels
Greetings. Thanks for the awesome editor! But i have one issue. I do not have an image uploader backend so i wanted to disable this option. But when i do...
We noticed this a couple of times now, but i am unsure if it can be solved. When you try to export your generated G-code to a sd card that...
I often know the files are angled in the .STL and try to align them to the ground plate using the angle settings. But now only a 1° or 1%...
Added translation for Dutch, Belgium (Nederland, België) and should also be applicable for the Nederlands.
A feature I would like to request is the addition of price simulation or options what output is desired. As of now PrusaControl shows the length of filament needed for...
This might not seem as a big mistake, But i wrote custom code to generate all elements, thus i knew for sure i needed 120 parts. Your code (that is...
**Describe the solution you'd like** When using don't support bridges the slicer still infills under a narrow flat top. But this would easily be bridged by the top layers. **Describe...
At the moment prusaConnect works great if you print trough the interface. But if you start a print from the SD card it cannot show any progress or print time...