OctoPrint-Tasmota
OctoPrint-Tasmota copied to clipboard
jneilliii
Hi, Thank you for the great plugin! I'm suspecting this issue (https://github.com/jneilliii/OctoPrint-Tasmota/issues/124) is coming back. OctoPrint-Tasmota version: 1.0.3 OctoPrint version: 1.6.0 How to reproduce: I usually do both "power on...
My setup: - Octoprint running on old laptop on Windows as a service - Printer connected via USB to Windows laptop with it's own swtich always on - Both elements...
To calculate the costs per KWh more accurately, please allow more digits behind the decimal point. The cost here per KWh is 0.3424 €. Currently the input in the field...
I've recently added a Sonoff S31 that I've flashed with Tasmota and installed the Tasmota plug-in for OctoPrint, but I'm seeing some really odd UI behavior in TouchUI that I'm...
It would be very useful that for on some errors, such as printer disconnects, homing failures and serial timeouts, this plugin waits a few minutes before switching off the power....
looking at the usage graphs, cost doens't seem to increment. I'm assuming total should be a total costs - so this doesn't climb either. Did i miss something in my...
I found out the problem! I opened the energy_data.db using 'DB Browser for SQLite.exe' (https://sqlitebrowser.org/dl/) and noticed the value of 'idx' was empty in the entire column. Since 'idx' was...
The tooltip for 'idle target temperature' states "Power off will be delayed until **all heaters** reach this temperature" I have discovered that this does not happen - the power off...
I managed to integrate my plug the other day, but I have detected readings that do not match, can you guide me 