John Clecak

This problem occurs on Jumper T16 S/N: PHO18764 Please let me know if you'd like me to take it apart and see if I can find identifying information on the...

can someone please tell me which display this is currently configured for and/or where this is done in the code? I found the part where the display resolution is configured...

now looking at ltdc.c, wondering if perhaps I need to adjust GPIO_SPEED_FREQ_LOW or HAL_Delay values. Rocketstrong, did you adjust any of these values? or can you offer any shot in...

...now wondering if my display is a different resolution than the author's and if this could be the cause of the jittering. I also suspect that the following parameters may...

Still thinking about this here. I'm wondering if this could somehow be due to the "bad connectors" problems that the t16 is known for. However, since there is no video...

I just tried the 0.1.2 build and I don't see any improvement, or any visible change for that matter. Your efforts are definitely appreciated, though - thank you very much!...

thank you for the info, @thp - I see that my card is SB0570, as well. can anyone recommend a particular model that is sbemu compatible, readily available (on ebay)...

I am seeing a similar problem on an Intel NUC, which has no means of audio output other than HDMI. Sbemu appears to be working, but I hear no sound....