Javier Jaimovich
Javier Jaimovich
Timeseries Classification Mode not active on GUI both in Windows and OS X. Selection button is unavailable for user.
I have found that EMG stops streaming from MyOSC when the Myo is not synced. This happens after a few minutes... is it possible to force the MyOSC to re-send...
Fixed OSC error due to EMG data format
Ideally, we should be able to receive the battery level via OSC
It would be useful to be able to connect to an specific port when running the program. This would save time by avoiding the "searching for ports" task
Myo MAC address is in the wrong format. For example, the following message corresponds the the address "df:01:2b:46:75:39" - Myo: MyO negro, Battery level: 100/100, Connection: 0, **Address: b'9uF+\x01\xdf'**, Firmware:...
Gyroscope and Acceleration are being reduced to only one value: e.g. /myo/accel 0 1920.098755 /myo/gyro 0 366.961853 These should give values for each of the three axes
Orientation data is being sent with four values (i.e. /myo/orientation 1 **-13912. 4767. -1452. 7074.**) It would be ideal to have this data formatted as the MyOSC application, with yaw,...
Implement the option to send vibrations to the Myo with an OSC message.
EMG osc data is being sent in two messages: /myo/emg 1 888998399 -1048325 /myo/emg 1 254 2 3 242 2 243 24 248 It is not clear how to decode...