iw2lsi

Hi... I'm also experiencing strange results with the sync-word... regardless if set while in sleep or in idle mode. Just as an example, my receiver (configured with syncword=0x12) decodes frames...

Hi... take a look at the default port settings: #define LORA_DEFAULT_SPI SPI #define LORA_DEFAULT_SPI_FREQUENCY 8E6 #define LORA_DEFAULT_SS_PIN 10 #define LORA_DEFAULT_RESET_PIN 9 #define LORA_DEFAULT_DIO0_PIN 2 am I wrong or you are...

Hi... yes... it could be related to issue #182... I've also seens weird behaviours with the AP appearing as "open" instead of "encripted".... I'll check it again... Giampaolo Il giorno...

Hi, I've done some test also with latest (on platformIO) upstream libs... same behaviour... 1) the first time while trying to access the AP I was asked for the default...

Hi, after debugging a little bit more, it seems to me that some of the problems I'm facing could be related to my Windows 10 O.S... using iOS or an...

BTW... I've tested also: http://192.168.1.208:8080/cgi-bin/ptz.sh?dir=down which does not work... and: http://192.168.1.208/cgi-bin/ptz.sh?dir=down that seems to works but again... it takes more tha 60s to execute a single movement...

enabled... but nothing changes... it could be that I have a poor link budget... I'll try to move the camera a little bit closer to the router ASAP... thanks for...

Hi... you mean by using the web interface ? I'm not aware of a iOS/Android app... it's slow... and it appears to be slow even if I ssh into the...

Hello katodo, for me is working... AT+CIPETHMAC? +CIPETHMAC:"1c:5e:09:xx:xx:xx" during the boot phase, I see: I (2398) tcpip_adapter: sta ip: 192.168.1.159, mask: 255.255.255.0, gw: 192.168.1.254 I'm working on OLIMEX ESP32-GATEWAY w/...

Hi, I've just emailed it to you...