Ivan Gayton

Yes, with Firefox. However, I've just noticed/realized that there's a second workaround here: you can remove the filetype filter from the dialogue in Firefox. And once I realized that, I...

Thanks! Great work!

We will. There's a moderate amount of soldering that needs doing anyway, unless you pay extra for pre-soldered header pins from ArduSimple.

Hmm, I'm worried about 6S—and even 5S—batteries being a hassle to procure and charge. If we stick to 3S, it's extremely easy to buy them, and in an absolute pinch...

As for a sanity check: [Ardusimple with an xbee power draw](https://www.ardusimple.com/question/amperage-needed/) ~200mA [Pi zero power draw](https://www.jeffgeerling.com/blogs/jeff-geerling/raspberry-pi-zero-power) ~140mA [Pi 4B loaded to the nuts power draw](https://www.pidramble.com/wiki/benchmarks/power-consumption) ~1280mA 7 Zeros ~1A 2...

Actually, that's a very interesting thought about the paths; I suppose an additional workaround would be to move the directory full of images into the home folder to shorten the...

I'm for this.

Foam: current best practice is 2-inch rigid polystyrene insulation foam: http://www.homedepot.ca/product/foamular-c-300-extruded-polystyrene-rigid-insulation-24-inch-x-96-inch-x-2-/905952 Using this rigid foam with a good thickness removes the necessity for carbon fiber sheet. The rods I used...

Wow, this looks great! Yes, this looks well-built. You may need to trim your foam a bit more; I suspect that your props will be over the foam on the...

Hi, It's a soldered "star" of 12guage wires. Have a look at the instructions I've just put on the wiki: https://github.com/ivangayton/OpenUAV/wiki/04-Construction-instructions I'll put some better photos up as soon as...