israelgoldstein

I also like the suggestion.

I've modified my config file, and removed all systems except the one where i noticed the issue here is another example, (log file should be clearer as its only for...

and 1 more log 22501-1671434237_851325000-call_17 2:17 AM TGID 22501 Frequency: 851.3250 [12-19-2022_0207_00.log](https://github.com/robotastic/trunk-recorder/files/10256763/12-19-2022_0207_00.log)

I'm facing the same issue,, but i got it working initially, if i login from my phone app and add myself to the channel, some trick like that but after...

my conf file is FULL of channels - which i wouldn't want to post here - but the config i know is good, with just 3 AirSpys its good, with...

After removing my Channels, here is the config file FYI with the channels still in the config, this will run, as the last dongle was disabled, ``` fft_size = 2048;...

finally installed usbtop as I just revisited this issue, and i still get errors of Aug 28 22:16:35 SDRPC001 rtl_airband[181131]: SoapySDR device 'driver=airspy,serial=0x744C60C8215B644F': readStream failed: TIMEOUT Aug 28 22:16:36 SDRPC001...

i just tried changing 2 of the AirSpy's to 3.0 Sample Rate instead of 6.0, and i was still getting the same behavior

Bus ID 0 (Raw USB traffic, all USB buses) To device From device Device ID 1 : 0.00 KiB/s 0.00 KiB/s Device ID 2 : 5.78 KiB/s 23701.24 KiB/s Device...

I'm new to this software, and have experienced this from the beginning , attached is the output: ``` > 476.562 476.438 476.337 476.587 476.387 476.312 476.637 476.362 476.887 476.537 476.837...