nick n.

without the process detailed here: https://github.com/netdisco/snmp-info/wiki/Simulating-Agents#get-snmp-datadump better melanox support will most likely not be coming soon. we rly need to the data dumps detailed there to provide better support.

the good news is that i was able to load up the snmprec file in my test setup. the bad news is that even after registering on the mellanox portal...

thx for that, i just committed this to netdisco-mibs. there are a few more pull & change requests i'd like to merge over the coming days. then i'll create a...

to add support for a specific device class we need:: 1. the mibs for the device. i forgot when i added them, but the latest release ( https://github.com/netdisco/netdisco-mibs/releases/tag/4.020 ) should...

it has been reported on irc that at least 1 c9800 model seems to produce the expected output with s::i::l2::airespace. tested by forcing 1 specific model in layer3 overrides via:...

> I got past the discovery phase with a rough and ready Meraki.pm file but only got the MAC addresses not the IP to Port or IP to MAC mapping....

see https://github.com/netdisco/netdisco-mibs/issues/196 i addad most of what i would say here to that issue. the tl;dr is: if you have a more recent mib collection for tp-link (i found 2022-08-31)...

can be seen in the context of #405 for the technical part i think snmp::info modules are determined by the enterprises oid, that will determine in most cases what data...

after letting it sink in for some time, after a few more rounds of mergers in the networking world, and after stealing your rancid code :) , after looking at...

could you provide us with the output of netdisco-do -DI arpnip -d ? (updated, dont' need -Q for this) if it's sensitive data you can either email it or set...