nick n.

> i'll leave the issue open for now and have a look on what's the best way to alrdy add these functions to devices running a firmware we are certain...

so, we have the fix you wrote that works for these devices. but since l3::foundry has such a wide range of matching products i don't want to enable it for...

so i had a look at their eol (https://support.ruckuswireless.com/product_families/23-eol-fastiron-icx-products) and newer (https://support.ruckuswireless.com/documents/1592-ruckus-icx-switch-7150-7250-7450-quick-start-guide-qsg) stuff. i downloaded the firmware packs for a few different products running ironware8, also found some older ironware7...

after having a closer look i noticed that just all their mibs in 1 file, which we actually documented here: https://github.com/netdisco/netdisco-mibs/blob/master/foundry/README so i think it that ruckus + icx will...

either they didn't update the "last-updated" part of their mibs (silverpeak) or the mibs are ancient (circa 2012). since your device has a firmware date that mentions 2021 the mibs...

vendor, os, model & version sometimes are detected by default as well, but not in this case it seems. first step will be to merge the mibs https://github.com/netdisco/netdisco-mibs/pull/66 a basic...

that makes things easy. could you also provide an snmpwalk like you did for the g8052 ones? i'll have a quick look at both, but will be till middle next...

at first sight lenovo shouldn't be to hard i think, the support the standard rfc mibs all over the place. haven't looked into detail yet if the output format matches...

so i'm seeing some strange issues and i'm trying to figure out if that's just snmpsim doing funny things or real behaviour: while the management interface says it's at 1.0gbps,...

while i was impressed with the standard compliance at first, the lenovo mibs feel more like a required checklist item: "custom information base: ✔️ " :) those strange interface speeds...