Thomas

Changing datetime on thermostat gives callback errors

2

Using API V3 call to change thermostat.datetime gives the following errors within log: _2022-04-25 12:50:20.105 W 112: [thermostat] Set date: invalid data, wrong length 2022-04-25 12:50:20.105 E 113: [emsesp] Call...

boiler.nrgtotal with spikes and wrong value after update

8

nrgtotal has spikes within timeline. on system 1 (ems 2.0) it looks like this:  On May 10th I did a firmware upgrade from 3.6.5 to 3.7.0-dev.10. The nrgtotal value...

As far as I can see new Bosch Gateways are not accessible on local LAN anymore. Therefore the EMS-ESP Adapter does not work. Older Gateways could be accessed by local...

Energy recordings (consumption) enabled for ems-esp gateways

28

With adapter version >= 2.3.1 energy consumption processing and statistics for the ems-esp gateways are enabled. Similar to the "recordings" within the original Bosch gateways the energy statistics are processed...

### No existing issues. - [X] There is no existing issue for my request. ### Related problems I do have fields within adapter config dialog which requires input to be...

Supporting latest Arduino Core v3 - issues with fixed Network IP address, settings lost after upgrade etc

16

Being in my holiday home with netfit thermostat moduline 2050 (ems 2.0) I recognized that the thermostat_hc1_mode does not work anymore (neither dashboard nor mqtt). No changes possible - no...

Search for extended EMS+ entities (switchPrograms and holidayModes) are disabled for now

4

https://github.com/emsesp/EMS-ESP32/issues/1935 has indicated that the search for extended entities might bring the EMS-ESP gateway to crash because of memory problems. There is no solution until now - I have disabled...

https://github.com/emsesp/EMS-ESP32/issues/2752