Robert Neumann

Hey, that's all great, but maybe you can step it up and try to make it an option in the UI? Is that doable for you? :)

Of course. If it's too hard to add an extra option, you can still add the clock gen disable code to an existing one. Good luck! :)

Pull request would be great, thanks :)

Ususally this goes via pull requests. You can do everything from the Github page. Does it work for you?

It is certainly operating the 3.3V regulator on the ESP board out of specs. This might work fine for a while, then fail suddenly. I would repair the barrel connector...

These look typical for bad cables, yep. Some consoles (and revisions) also have significantly more banding than others.

Okay, this is probably caused by the general problems dealing with VGA sources (separate H+V Syncs). The GBS has a hardware unit that tells the source format, but it only...

It would have a better chance with CSync. Maybe you can find and try a sync combiner. Those would be useful to have for Arcade board owners anyway :) Example:...

So the issue here is that the clock generator clock has to be enabled (switched active in the ASIC) at precisely the time when the tear bar is not visible....

It always has a chance to reappear when any kind of sync glitch/disturbance happens. A proper locking mechanism would help fix this as well. It's all about finding a way...