Jay Holsapple

@kobajagi How many copies of the original firmware code do you have? And are all the hash values of those copies the same? Make sure the speaker is connected. Are...

Your command line looks fine. Which BIOS update did you apply?

Just to be clear, it was about a year ago since you updated the BIOS. It has not been updated within the past few months. I believe the most recent...

Well, we are programming the EEPROM in-circuit. That creates many variables. For example, your programmer might be trying to "charge" the RTC battery. At factory, they put these chips in...

I think the default payload is SeaBIOS (MBR) and you would need something like Tianocore to locate EFI on the disk. @Thrilleratplay has scripts to build Skulls. But I don't...

I think this is more of a Coreboot question and how to best initialize the DRAM. If the init process ignores the DRAM SPD data then it could inadvertently overclock...

For further reading on how Coreboot initializes DRAM on Sandybridge controllers and why/how max_mem_clock_mhz bypasses the factory soft fuse limit SCLK 800 MHz (and partly why changing this parameter is...

> If you need help in adding support for your **30, but promise to be around and be able to test images / flashing procedures, we could team up and...

No worries, I'll take care of all that for you. Plus I'll move and socket the EEPROM, just like on the desktop mobos, and give you a few DIP8 chips...

That would be sweet, using the NVIDIA GPU! But questions are already swarming around Pooh's honey pot: It'll boot using the Intel HD GPU but how would you force it...