DroneMapper.com

Thanks. Yes, currently there isn't a seamline feathering option in stock MicMac so that radiometric balance routine tries its best to blend all tiles. It is more apparently when you...

Implementing a seamline feather routine would solve the issue. There are some additional tweaks to the `Tawny` command and radiometric balancing that can also improve results.

Correct. Yes additional `Tawny` parameters can improve the results. One can also create a custom .xml and feed this into `Porto` with a larger blending window / etc.

Try `DEq=1 DegRapXY=[4,4] SzV=75 NbPerIm=5e4` DefCor=0 will force MICMAC to correlate every pixel, even if it is a hidden point. It is good in some cases. Thanks

Usually the ortho blending gets the best results when you run MICMAC to the highest zoom level (aka native resolution) as the ortho tiles are draped onto the DEM via...

My first guess is that your data is suffering from duplicate geotags which causes a problem when trying to process: ``` DJI_0046.JPG : WGS84(rad) [0.147455,0.829388,450] GeoC [4.26867e+06,634038,4.68136e+06] DJI_0047.JPG : WGS84(rad)...

Yes, the geotags look fine on closer inspection. We'll take a look at the data and try to process/recommend optimized settings

I attempted to process the data and wasn't successful. Usually for long transects MM requires at least 4 flight lines to generate a good result. I also noticed that image...