NodeMICMAC

NodeMICMAC copied to clipboard

Postet this first at the ODM community help Forum, but probably it better fits here. I tried to process a dataset on the NodeMicMac, but unfortunately it was not succesful.

WEBODM tells me: “An orthophoto could not be generated. To generate one, make sure GPS information is embedded in the EXIF tags of your images, or use a Ground Control Points (GCP) file”

but the Images are from a DJI Mavic and do have GPS Information, and from what i found out so fare, GCP are not yet impementet on WebODM for NodeMICMAC.

console.txt

My first guess is that your data is suffering from duplicate geotags which causes a problem when trying to process:

DJI_0046.JPG : WGS84(rad) [0.147455,0.829388,450] GeoC  [4.26867e+06,634038,4.68136e+06]
DJI_0047.JPG : WGS84(rad) [0.147455,0.829389,450] GeoC  [4.26866e+06,634036,4.68137e+06]
DJI_0048.JPG : WGS84(rad) [0.147454,0.829389,450] GeoC  [4.26866e+06,634034,4.68137e+06]

It is difficult to tell without the data but some older Mavic and have this issue. If you can share the data we can be sure.

You can also load the images in a program like geosetter to view the flight pattern and geotag data to confirm. Thanks

Thank you very much for the answer. I now did upload my dataset here:

https://drive.google.com/open?id=1ac5AwGTMg7H1Y77vvNqRDuLCtmY9pMDJ

However I did check the GPS Data from the images and the coordinates are different in every Foto. I loaded them via Geosetter in to google earth to check. (see Images below)

By "dublicate geotags" you mean that 2 pictures have the same Geotags, right?

Yes, the geotags look fine on closer inspection. We'll take a look at the data and try to process/recommend optimized settings

I attempted to process the data and wasn't successful. Usually for long transects MM requires at least 4 flight lines to generate a good result. I also noticed that image 0001 and 0002 are disconnected from the scene. I'll give it another shot as time permits over the weekend. Thanks

Okey, thank you very much. Yes, Image 1 and 2 are from a different Flight, but from the same area. I was able to process the images in pix4d, dronedeploy and odm, so It would be interesting compare the results for me.