bdring

What controller is it? Attach a photo.

Pen Laser TMC2208 makes it sound like custom hardware. I suspect there are pins interfering with the SPI circuitry.

https://linuxcnc.org/docs/html/gcode/m-code.html#mcode:m66 I can add that to our dev issues tracker for future consideration. It does not sound too complicated, but we are working on more basic things right now.

It is good to hear from you again. I will look at this when I get a chance. The last time I checked, I think it was working OK. You...

The latest version is V1p2p2. I added it to the repo

There should have been a spreadsheet in there somewhere On Tue, Dec 1, 2020 at 7:29 PM DIGI Byte wrote: > Awesome! Thank you! > just a final question, but...

Electrolux? It is likely the format. Everything we know about SD carts is here. http://wiki.fluidnc.com/en/config/sd_card

Start by adding a few files via your pc then reading them using FluidTerm using $sd/list

Thanks for the info. I will try to repeat the problem as soon as I can. I am driving home for the next 2 days.

Let me Google that for you I found this.  Looks like it is just a polymer coating. It should be a drop in replacement. Please consider donating to the...