Ioannis Giannakas
Ioannis Giannakas
Continue to adapt color temperature down to the sleep temperature after sunset. Results in a gradually warming light during the night time rather than a fixed color temperature throughout the...
### Description of the bug Extra perimeters on overhangs prints on air when external perimeters option is enabled. To enable successful bridging the extra perimeters on overhangs need to print...
Introduced experimental option to fully disable solid infill printed against sloping walls even when ensure vertical thickness is turned off. Aiming to address: https://github.com/SoftFever/OrcaSlicer/issues/3224 also possibly this: https://github.com/SoftFever/OrcaSlicer/issues/3016 and this:...
This PR achieves the same outcome as https://github.com/SoftFever/OrcaSlicer/pull/3235 only with a different implementation approach. This one eliminates slightly less vertical infill however it is safer as it retains more of...
Porting the wipe inside before extruding an external perimeter feature from Super Slicer. This helps reduce seam visibility and visibility of slight over extrusion at the start of an external...
Aiming to address issue https://github.com/SoftFever/OrcaSlicer/issues/413 and corresponding development backlog item By default Orca and all the Slic3r derivatives implement filtering to remove areas where internal bridging may be unnecessary as...
Possible fix for #3154 and #3031 Also fixed issue due to retract on layer change being enabled causing two de-retractions when starting the handle cube. And also two retractions when...
Removed inherited setting from BBS where the monotonic line infill and top pattern did not respect the user set infill/wall overlap setting. This can result in tiny holes on top...
### OrcaSlicer Version 1.8 Dev ### OS version Mac OS Sonoma ### Additional system information _No response_ ### Printer bambu X1 carbon ### How to reproduce Have noticed the below...
Happy New Year!!! So I've been debating whether to raise this PR or not, as there must be a reason it’s done this way (probably 🤣), so requesting feedback from...