Ioannis Giannakas

> This looks good! Have you been testing this at home yourself for sometime? Yeap I’ve got it setup in my house across 4 zones and works like a charm....

Thought to comment back- been using it and has been flawlessly since the beginning of Feb.

This is what I do to avoid that transition and prime the light with the right colour temp and brightness when turning the lights on using motion sensors. I get...

Ive made a change to the component to continue adapting the colour temperature after sunset downwards, making it dim and warm up further rather than staying a static colour temp....

Why don't you disable the adaptive lighting switch before calling the light toggle switch in your automation?

You could check the status of the light. If it’s off, turn the adaptive lighting switch off and then turn the light on. If it’s on, the other way around....

experiencing the same issue with my R7800. 1. Router configured as dumb access point 2. Installed release 19.07.5 3. Configured 5Ghz band as 80mhz, channel 32 (no conflicting AP's on...

upvoting this as well. Not sure how to do this, and the documentation is not very helpful unfortunately.

Same issue here. TP Link Smart Plug **HS110**, HW Version 4.1, Firmware Version: 1.1.0, running the latest home assistant release. Using NMAP I see that port 80/TCP is open. My...

> I'm seeing this on HS100 devices as well as HS110. Tried restarts, removing integration and re-adding but obviously nothing working. 4 of my 8 devices are working, seems consistently...