Ioannis Giannakas

indeed that is very interesting. This will need a tutorial written up as the parameters won't be simple to calculate as its basically a compensation that will be bespoke to...

> First test has yeildes very positive results👍 > >  What values are you using? Just the defaults? Thinking of testing it too…

Tried the feature, it’s fantastic!! @SoftFever you need to update the front page of the repo to include this, no other slicer has this built in and it’s a distinguishing...

The infill pattern creates small extrusions at the 90 degree mark of the large line segments where the nozzle changes direction. These are set to significantly less flow than the...

You can do this as I mentioned in issue https://github.com/SoftFever/OrcaSlicer/issues/3324 Set travel distance threshold to 0. Set wipe to 1mm or so. Set retract before wipe to 0 if you...

> I'm a bit hesitant to change the current behavior. Many users, myself included, are used to the existing limitation for combined infill, which is determined by the nozzle diameter....

An alternative approach could be to allow a max layer height specifically for infill when layer height is combined, shown as an option on the strength tab. Allow for %'s...

> . I cannot use infill combination in my prints because of this. I have max layer height set to 0.2mm on my 0.4mm nozzle and infill combination still wants...

Adding project 2x project files with similar issues in opening. Always opening on the same printer & plate combo so the workaround here doesnt seem to work. [Archive.zip](https://github.com/SoftFever/OrcaSlicer/files/13808931/Archive.zip)

Also noticing that the Calibration tab for bambu printers is crashing again on Sonoma. Looks like something is weird with the compilation toolkit for Sonoma.