Michal Suchánek

The table list is not necessarily empty - some distributions load both iptables and nftables. The list needs to be joined to get the full table list.

I don't remember what firmware version was preinstalled. Is there some way to run update when the firmware is up-to-date? The card is some ancient 8GB A-data.

Old: [DEV] Version: 0.64.3 commit: bf236f5e radio: 1.12.1 New: [DEV] Version: 0.74.2 commit: b60ba765 radio: 1.13.3

What is "not supported SD card"? Either it's a SD card, or it is not a SD card. It says the power draw is 25mA, and besides flipper failing to...

It says specifically "it is important to use high-quality branded microSD cards such as SanDisk, Kingston, etc." and "supports microSD cards up to 128 GB, but we recommend using a...

fwiw working cards include: Type: FAT32 3875328KiB total 27HP 40DSG 3.0 Type: FAT32 31150080KiB total 03DS 23CSG 8.0 broken: Type: FAT32 8059392KiB total 1dDA DS 1.0

In what way does it not conform, specifically? It does work when flipper is powered on normally, it only fails during update.

 Type: FAT32 8059392KiB total 8052736KiB free 1dAD SD 1.0 SN:21100b8e 07/2011

Sure, the simplest is just changing the card. However, making more cards work is also an option which makes it more likely that a random card will work.

Tried to disable the peripherial power when probing the card, and it does not make any difference. Either I am doing it wrong or powering it off is not sufficient.