Zygfryd Homonto
Zygfryd Homonto
I have bought the small (100x100mm) hot plate heater, removed the original controller (it was only capable to set the desired temperature and it kept it there) and used your...
am I supposed to share it here? 
So I am using this library for all my devices - some sleep, some are always on. I would like to ask if there is any possibility to catch that...
**Describe the bug** Setup failed for custom integration toyota: Requirements for toyota not found: ['mytoyota==0.7.7']. **To Reproduce** Upgrade HA to 2022.6
portrait is ok, landscape is broken somewhere in calculations
Hi, With all happines of using this integration, there is a small topic to consider. **Task**: choose 3 devices you would like to track Way to do it (today): open...
I run your script and I am not getting the point: the folder /etc/pve is completely empty in the file: proxmoxetc.2023-03-10.19.30.04.tar I followed your wiki and while all other folders...
nut configuration is recreated from the scratch when the system restarts - it takes from the template i.e. upsmon.conf ALWAYS adds: `POWERDOWNFLAG /etc/killpower` that causes UPS to shutdown that in...
### The problem ``` Compiling .pio/build/box42/lib962/ESPAsyncWebServer-esphome/AsyncEventSource.cpp.o .pio/libdeps/box42/AsyncTCP-esphome/src/AsyncTCP.cpp:753:2: error: #else without #if #else ^~~~ .pio/libdeps/box42/AsyncTCP-esphome/src/AsyncTCP.cpp:755:2: error: #endif without #if #endif ^~~~~ .pio/libdeps/box42/AsyncTCP-esphome/src/AsyncTCP.cpp:1020: error: unterminated #if #if LWIP_IPV4 && LWIP_IPV6 ``` here:...
``` 15:33:07.182 > WiFi connected 15:33:07.185 > IP address: 192.168.1.119 15:33:07.210 > State changing from: 3 to 4 15:33:07.783 > Active mDNS services: 20 15:33:07.783 > Accepting connection 15:33:07.786 >...