esp32cam-rtsp
esp32cam-rtsp copied to clipboard
Published
20 hours ago •
rzeldent
rzeldent
reboot on connect
15:33:07.182 > WiFi connected
15:33:07.185 > IP address: 192.168.1.119
15:33:07.210 > State changing from: 3 to 4
15:33:07.783 > Active mDNS services: 20
15:33:07.783 > Accepting connection
15:33:07.786 > [ 32178][V][main.cpp:310] on_connected(): on_connected
15:33:07.800 > [ 32194][I][ArduinoOTA.cpp:141] begin(): OTA server at: esp32-7c9ebd606f90.local:3232
15:33:07.806 > [ 32194][V][main.cpp:302] start_rtsp_server(): start_rtsp_server
15:33:07.815 > [ 32196][V][WiFiServer.h:42] WiFiServer(): WiFiServer::WiFiServer(port=554, ...)
15:33:07.819 > [ 32203][I][rtsp_server.cpp:9] rtsp_server(): Starting RTSP server
15:33:07.825 > State changed from: 3 to 4
15:33:32.917 > Guru Meditation Error: Core 1 panic'ed (LoadProhibited). Exception was unhandled.
15:33:32.923 >
15:33:32.923 > Core 1 register dump:
15:33:32.926 > PC : 0x400e5493 PS : 0x00060930 A0 : 0x80164a24 A1 : 0x3ffb26f0
15:33:32.934 > A2 : 0x00000000 A3 : 0x3ffe9af0 A4 : 0x00000000 A5 : 0x00000008
15:33:32.942 > A6 : 0x00000000 A7 : 0x3ffc7168 A8 : 0x800e5490 A9 : 0x3ffb26d0
15:33:32.948 > A10 : 0x3ffe88e8 A11 : 0x3ffe9350 A12 : 0x0000180c A13 : 0x00000001
15:33:32.956 > A14 : 0x00000004 A15 : 0x3ffb6cb0 SAR : 0x0000000d EXCCAUSE: 0x0000001c
15:33:32.964 > EXCVADDR: 0x00000008 LBEG : 0x4008b2e8 LEND : 0x4008b2fe LCOUNT : 0xffffffff
15:33:32.973 >
15:33:32.973 >
15:33:32.973 > Backtrace: 0x400e5490:0x3ffb26f0 0x40164a21:0x3ffb2710 0x400e68a6:0x3ffb2730 0x400e69ff:0x3ffb2770 0x400e6625:0x3ffb27c0 0x400e6660:0x3ffb27e0 0x400d692f:0x3ffb2800 0x400ea009:0x3ffb2820
15:33:32.989 >
15:33:32.989 >
15:33:32.989 >
15:33:32.989 >
15:33:32.989 > ELF file SHA256: fe331861685ab646
15:33:33.013 >
15:33:33.195 > Rebooting...
15:33:33.196 > ets Jun 8 2016 00:22:57
15:33:33.198 >
15:33:33.198 > rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
15:33:33.203 > configsip: 0, SPIWP:0xee
15:33:33.203 > clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
15:33:33.216 > mode:DIO, clock div:2
15:33:33.216 > load:0x3fff0030,len:1184
15:33:33.216 > load:0x40078000,len:13104
15:33:33.218 > load:0x40080400,len:3036
15:33:33.242 > entry 0x400805e4
15:33:33.651 > [ 3][V][WiFiServer.h:42] WiFiServer(): WiFiServer::WiFiServer(port=80, ...)
15:33:33.656 > [ 4][V][WebServer.cpp:87] WebServer(): WebServer::Webserver(port=80)
15:33:33.678 > [ 32][D][esp32-hal-cpu.c:244] setCpuFrequencyMhz(): PLL: 480 / 2 = 240 Mhz, APB: 80000000 Hz
15:33:34.129 > [ 481][I][esp32-hal-psram.c:96] psramInit(): PSRAM enabled
15:33:34.150 > [ 505][I][main.cpp:350] setup(): CPU Freq: 240 Mhz
15:33:34.155 > [ 505][I][main.cpp:351] setup(): Free heap: 236616 bytes
15:33:34.160 > [ 505][I][main.cpp:352] setup(): Starting ESP32CAM-RTSP...
15:33:34.166 > Config version: 1.4
15:33:34.169 > Config size: 450
15:33:34.169 > Loading configurations
15:33:34.172 > [iwcAll]
15:33:34.172 > |-- [iwcSys]
15:33:34.174 > | |-- 'iwcThingName' with value: 'ESP32CAM-RTSP'
15:33:34.177 > | |-- 'iwcApPassword' with value: <hidden>
15:33:34.183 > | |-- [iwcWifi0]
15:33:34.183 > | | |-- 'iwcWifiSsid' with value: 'BT-gowno'
15:33:34.188 > | | \-- 'iwcWifiPassword' with value: <hidden>
15:33:34.194 > | \-- 'iwcApTimeout' with value: '30'
15:33:34.197 > |-- [iwcCustom]
15:33:34.197 > | |-- [board]
15:33:34.199 > | | \-- 'bt' with value: 'AI THINKER'
15:33:34.202 > | |-- [camera]
15:33:34.205 > | | |-- 'fd' with value: '100'
15:33:34.208 > | | |-- 'fs' with value: 'VGA (640x480)'
15:33:34.210 > | | |-- 'q' with value: '12'
15:33:34.213 > | | |-- 'b' with value: '0'
15:33:34.216 > | | |-- 'c' with value: '0'
15:33:34.219 > | | |-- 's' with value: '0'
15:33:34.224 > | | |-- 'e' with value: 'Normal'
15:33:34.227 > | | |-- 'wb' with value: '1'
15:33:34.230 > | | |-- 'awbg' with value: '1'
15:33:34.233 > | | |-- 'wbm' with value: 'Auto'
15:33:34.235 > | | |-- 'ec' with value: '1'
15:33:34.238 > | | |-- 'aec2' with value: '1'
15:33:34.241 > | | |-- 'ael' with value: '0'
15:33:34.244 > | | |-- 'aecv' with value: '300'
15:33:34.249 > | | |-- 'gc' with value: '1'
15:33:34.252 > | | |-- 'agcg' with value: '0'
15:33:34.255 > | | |-- 'gcl' with value: '2X'
15:33:34.258 > | | |-- 'bpc' with value: '0'
15:33:34.260 > | | |-- 'wpc' with value: '1'
15:33:34.263 > | | |-- 'rg' with value: '1'
15:33:34.266 > | | |-- 'lenc' with value: '1'
15:33:34.269 > | | |-- 'hm' with value: '0'
15:33:34.272 > | | |-- 'vm' with value: '0'
15:33:34.274 > | | |-- 'dcw' with value: '1'
15:33:34.277 > | | \-- 'cb' with value: '0'
15:33:34.283 > | \-- [io]
15:33:34.283 > | \-- 'li' with value: '0'
15:33:34.285 > \-- [hidden]
15:33:34.285 > [ 632][V][main.cpp:244] initialize_camera(): initialize_camera
15:33:34.294 > [ 636][I][main.cpp:245] initialize_camera(): Camera config: AI THINKER
15:33:34.299 > [ 642][I][main.cpp:247] initialize_camera(): Frame size: VGA (640x480)
15:33:34.305 > [ 649][I][main.cpp:249] initialize_camera(): JPEG quality: 12
15:33:34.310 > [ 654][I][main.cpp:250] initialize_camera(): Frame duration: 100 ms
15:33:34.553 > State changing from: 0 to 2
15:33:34.553 > [ 908][D][WiFiGeneric.cpp:931] _eventCallback(): Arduino Event: 0 - WIFI_READY
15:33:34.644 > Setting up AP: ESP32CAM-RTSP
15:33:34.644 > Use password: <hidden>
15:33:34.646 > [ 997][V][WiFiGeneric.cpp:392] _arduino_event_cb(): AP Started
15:33:34.653 > [ 998][D][WiFiGeneric.cpp:931] _eventCallback(): Arduino Event: 10 - AP_START
15:33:35.216 > AP IP address: 192.168.4.1
15:33:35.216 > [ 1571][V][WiFiGeneric.cpp:395] _arduino_event_cb(): AP Stopped
15:33:35.222 > [ 1572][D][WiFiGeneric.cpp:931] _eventCallback(): Arduino Event: 11 - AP_STOP
15:33:35.230 > [ 1573][V][WiFiGeneric.cpp:392] _arduino_event_cb(): AP Started
15:33:35.236 > [ 1579][D][WiFiGeneric.cpp:931] _eventCallback(): Arduino Event: 10 - AP_START
15:33:35.244 > AP timeout (ms): 30000
15:33:35.244 > State changed from: 0 to 2
Same thing. I have ESP32CAM module (same as assets/ESP32-CAM.jpg) If I set AI THINKER in the config, it works without rtsp stream, but with the correct snapshot
Hi ReadShade/Homoto,
I do use the same module and cannot reproduce it. Could you get the latest version and try this again with or replace the line in platformio.ini?
monitor_filters = esp32_exception_decoder
This will hopefully give a stack trace with some more information.
Rene
monitor_speed = 115200 monitor_rts = 0 monitor_dtr = 0 monitor_filters = log2file, time, default, esp32_exception_decoder monitor_port = COM3
If I set AI THINKER and open it with browser (all works correct):
State changing from: 2 to 3
[ 31670][V][WiFiGeneric.cpp:395] _arduino_event_cb(): AP Stopped
[ 31670][D][WiFiGeneric.cpp:931] _eventCallback(): Arduino Event: 11 - AP_STOP
[ 31675][V][WiFiGeneric.cpp:392] _arduino_event_cb(): AP Started
E (45722) wifi_init_default: esp_wifi_get_mac failed with 12289
Connecting to [rs] (password is hidden)
WiFi timeout (ms): 30000
[ 31683][V][WiFiGeneric.cpp:395] _arduino_event_cb(): AP Stopped
[ 31677][D][WiFiGeneric.cpp:931] _eventCallback(): Arduino Event: 10 - AP_START
[ 31702][D][WiFiGeneric.cpp:931] _eventCallback(): Arduino Event: 11 - AP_STOP
[ 31723][D][WiFiGeneric.cpp:931] _eventCallback(): Arduino Event: 0 - WIFI_READY
[ 31730][V][WiFiGeneric.cpp:97] set_esp_interface_ip(): Configuring Station static IP: 0.0.0.0, MASK: 0.0.0.0, GW: 0.0.0.0
[ 31728][V][WiFiGeneric.cpp:340] _arduino_event_cb(): STA Started
[ 31736][D][WiFiGeneric.cpp:931] _eventCallback(): Arduino Event: 2 - STA_START
State changed from: 2 to 3
[ 32844][V][WiFiGeneric.cpp:362] _arduino_event_cb(): STA Disconnected: SSID: rs, BSSID: dc:2c:6e:27:c3:68, Reason: 4
[ 32844][D][WiFiGeneric.cpp:931] _eventCallback(): Arduino Event: 5 - STA_DISCONNECTED
[ 32851][W][WiFiGeneric.cpp:955] _eventCallback(): Reason: 4 - ASSOC_EXPIRE
[ 32858][D][WiFiGeneric.cpp:975] _eventCallback(): WiFi Reconnect Running
[ 32866][V][WiFiGeneric.cpp:97] set_esp_interface_ip(): Configuring Station static IP: 0.0.0.0, MASK: 0.0.0.0, GW: 0.0.0.0
[ 32953][V][WiFiGeneric.cpp:355] _arduino_event_cb(): STA Connected: SSID: rs, BSSID: dc:2c:6e:27:c3:68, Channel: 1, Auth: WPA2_PSK
[ 32954][D][WiFiGeneric.cpp:931] _eventCallback(): Arduino Event: 4 - STA_CONNECTED
[ 33371][V][WiFiGeneric.cpp:369] _arduino_event_cb(): STA Got New IP:192.168.1.99
[ 33372][D][WiFiGeneric.cpp:931] _eventCallback(): Arduino Event: 7 - STA_GOT_IP
[ 33375][D][WiFiGeneric.cpp:996] _eventCallback(): STA IP: 192.168.1.99, MASK: 255.255.255.0, GW: 192.168.1.1
WiFi connected
IP address: 192.168.1.99
State changing from: 3 to 4
[ 36497][W][ESPmDNS.cpp:222] queryService(): No results found!
Active mDNS services: 0
Accepting connection
[ 36498][V][main.cpp:310] on_connected(): on_connected
[ 36513][I][ArduinoOTA.cpp:141] begin(): OTA server at: esp32-240ac4f84a6c.local:3232
[ 36513][V][main.cpp:302] start_rtsp_server(): start_rtsp_server
[ 36515][V][WiFiServer.h:42] WiFiServer(): WiFiServer::WiFiServer(port=554, ...)
[ 36523][I][rtsp_server.cpp:9] rtsp_server(): Starting RTSP server
State changed from: 3 to 4
Creating TSP streamer
Created streamer width=640, height=480
Creating RTSP session
RTSP received OPTIONS
RTSP received DESCRIBE
RTSP received SETUP
RTSP received PLAY
[ 48366][V][WebServer.cpp:296] handleClient(): New client: client.localIP()=192.168.1.99
[ 48367][V][Parsing.cpp:122] _parseRequest(): method: GET url: / search:
[ 48370][V][Parsing.cpp:226] _parseRequest(): headerName: Host
[ 48375][V][Parsing.cpp:227] _parseRequest(): headerValue: 192.168.1.99
[ 48381][V][Parsing.cpp:226] _parseRequest(): headerName: Connection
[ 48387][V][Parsing.cpp:227] _parseRequest(): headerValue: keep-alive
[ 48394][V][Parsing.cpp:226] _parseRequest(): headerName: Cache-Control
[ 48400][V][Parsing.cpp:227] _parseRequest(): headerValue: max-age=0
[ 48406][V][Parsing.cpp:226] _parseRequest(): headerName: Upgrade-Insecure-Requests
[ 48413][V][Parsing.cpp:227] _parseRequest(): headerValue: 1
[ 48419][V][Parsing.cpp:226] _parseRequest(): headerName: User-Agent
[ 48425][V][Parsing.cpp:227] _parseRequest(): headerValue: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/109.0.0.0 Safari/537.36
[ 48440][V][Parsing.cpp:226] _parseRequest(): headerName: Accept
[ 48445][V][Parsing.cpp:227] _parseRequest(): headerValue: text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.9
[ 48463][V][Parsing.cpp:226] _parseRequest(): headerName: Accept-Encoding
[ 48469][V][Parsing.cpp:227] _parseRequest(): headerValue: gzip, deflate
[ 48476][V][Parsing.cpp:226] _parseRequest(): headerName: Accept-Language
[ 48482][V][Parsing.cpp:227] _parseRequest(): headerValue: uk-UA,uk;q=0.9,ru-RU;q=0.8,ru;q=0.7,en-US;q=0.6,en;q=0.5
[ 48492][V][Parsing.cpp:254] _parseArguments(): args:
[ 48497][V][Parsing.cpp:237] _parseRequest(): Request: /
[ 48502][V][Parsing.cpp:238] _parseRequest(): Arguments:
[ 48507][V][main.cpp:81] handle_root(): Handle root
If I try to open with VLC:
[ 57995][E][WiFiClient.cpp:422] write(): fail on fd 52, errno: 104, "Connection reset by peer"
client has closed the socket
client closed socket, exiting
closing TCP socket
closing UDP socket
closing UDP socket
Creating TSP streamer
Created streamer width=640, height=480
Creating RTSP session
RTSP received OPTIONS
RTSP received DESCRIBE
RTSP received SETUP
RTSP received PLAY
Creating TSP streamer
Created streamer width=640, height=480
Creating RTSP session
RTSP received OPTIONS
[ 82362][D][WiFiClient.cpp:546] connected(): Disconnected: RES: 0, ERR: 128
client has closed the socket
client closed socket, exiting
closing TCP socket
closing UDP socket
closing UDP socket
Creating TSP streamer
Created streamer width=640, height=480
Creating RTSP session
RTSP received SETUP
[ 88302][E][WiFiClient.cpp:422] write(): fail on fd 52, errno: 104, "Connection reset by peer"
[ 88303][I][WiFiClient.cpp:549] connected(): Unexpected: RES: 0, ERR: 9
RTSP received PLAY
client has closed the socket
client closed socket, exiting
closing TCP socket
closing UDP socket
closing UDP socket
Creating TSP streamer
Created streamer width=640, height=480
Creating RTSP session
RTSP received OPTIONS
RTSP received DESCRIBE
RTSP received SETUP
RTSP received PLAY
RTSP received TEARDOWN
closing TCP socket
closing UDP socket
closing UDP socket
Creating TSP streamer
Created streamer width=640, height=480
Creating RTSP session
RTSP received OPTIONS
[115246][D][WiFiClient.cpp:546] connected(): Disconnected: RES: 0, ERR: 128
client has closed the socket
client closed socket, exiting
closing TCP socket
closing UDP socket
closing UDP socket
Creating TSP streamer
Created streamer width=640, height=480
Creating RTSP session
RTSP received SETUP
[118518][E][WiFiClient.cpp:422] write(): fail on fd 52, errno: 104, "Connection reset by peer"
If I set ESP32CAM and open it with browser:
Config version: 1.4
Config size: 450
Loading configurations
[iwcAll]
|-- [iwcSys]
| |-- 'iwcThingName' with value: 'ESP32CAM-RTSP'
| |-- 'iwcApPassword' with value: <hidden>
| |-- [iwcWifi0]
| | |-- 'iwcWifiSsid' with value: 'rs'
| | \-- 'iwcWifiPassword' with value: <hidden>
| \-- 'iwcApTimeout' with value: '30'
|-- [iwcCustom]
| |-- [board]
| | \-- 'bt' with value: 'ESP32CAM'
| |-- [camera]
| | |-- 'fd' with value: '100'
| | |-- 'fs' with value: 'VGA (640x480)'
| | |-- 'q' with value: '12'
| | |-- 'b' with value: '0'
| | |-- 'c' with value: '0'
| | |-- 's' with value: '0'
| | |-- 'e' with value: 'Normal'
| | |-- 'wb' with value: '1'
| | |-- 'awbg' with value: '1'
| | |-- 'wbm' with value: 'Auto'
| | |-- 'ec' with value: '1'
| | |-- 'aec2' with value: '1'
| | |-- 'ael' with value: '0'
| | |-- 'aecv' with value: '300'
| | |-- 'gc' with value: '1'
| | |-- 'agcg' with value: '0'
| | |-- 'gcl' with value: '2X'
| | |-- 'bpc' with value: '0'
| | |-- 'wpc' with value: '1'
| | |-- 'rg' with value: '1'
| | |-- 'lenc' with value: '1'
| | |-- 'hm' with value: '0'
| | |-- 'vm' with value: '0'
| | |-- 'dcw' with value: '1'
| | \-- 'cb' with value: '0'
| \-- [io]
| \-- 'li' with value: '0'
\-- [hidden]
[ 633][V][main.cpp:244] initialize_camera(): initialize_camera
[ 637][I][main.cpp:245] initialize_camera(): Camera config: ESP32CAM
[ 643][I][main.cpp:247] initialize_camera(): Frame size: VGA (640x480)
[ 650][I][main.cpp:249] initialize_camera(): JPEG quality: 12
[ 655][I][main.cpp:250] initialize_camera(): Frame duration: 100 ms
E (664) camera: Camera probe failed with error 0x105(ESP_ERR_NOT_FOUND)
[ 695][E][main.cpp:394] setup(): Failed to initialize camera: 0x105. Type: ESP32CAM, frame size: VGA (640x480), frame rate: 100 ms, jpeg quality: 12
State changing from: 0 to 2
[ 732][D][WiFiGeneric.cpp:931] _eventCallback(): Arduino Event: 0 - WIFI_READY
Setting up AP: ESP32CAM-RTSP
Use password: <hidden>
[ 831][V][WiFiGeneric.cpp:392] _arduino_event_cb(): AP Started
[ 832][D][WiFiGeneric.cpp:931] _eventCallback(): Arduino Event: 10 - AP_START
AP IP address: 192.168.4.1
[ 1451][V][WiFiGeneric.cpp:395] _arduino_event_cb(): AP Stopped
[ 1452][D][WiFiGeneric.cpp:931] _eventCallback(): Arduino Event: 11 - AP_STOP
[ 1452][V][WiFiGeneric.cpp:392] _arduino_event_cb(): AP Started
[ 1459][D][WiFiGeneric.cpp:931] _eventCallback(): Arduino Event: 10 - AP_START
AP timeout (ms): 30000
State changed from: 0 to 2
State changing from: 2 to 3
[ 31481][V][WiFiGeneric.cpp:395] _arduino_event_cb(): AP Stopped
[ 31481][D][WiFiGeneric.cpp:931] _eventCallback(): Arduino Event: 11 - AP_STOP
[ 31485][V][WiFiGeneric.cpp:392] _arduino_event_cb(): AP Started
Camera probe failed with error 0x105E (45341) wifi_init_default: esp_wifi_get_mac failed with 12289
Connecting to [rs] (password is hidden)
WiFi timeout (ms): 30000
[ 31497][V][WiFiGeneric.cpp:395] _arduino_event_cb(): AP Stopped
[ 31488][D][WiFiGeneric.cpp:931] _eventCallback(): Arduino Event: 10 - AP_START
[ 31516][D][WiFiGeneric.cpp:931] _eventCallback(): Arduino Event: 11 - AP_STOP
[ 31537][D][WiFiGeneric.cpp:931] _eventCallback(): Arduino Event: 0 - WIFI_READY
[ 31544][V][WiFiGeneric.cpp:97] set_esp_interface_ip(): Configuring Station static IP: 0.0.0.0, MASK: 0.0.0.0, GW: 0.0.0.0
[ 31542][V][WiFiGeneric.cpp:340] _arduino_event_cb(): STA Started
[ 31550][D][WiFiGeneric.cpp:931] _eventCallback(): Arduino Event: 2 - STA_START
State changed from: 2 to 3
[ 31642][V][WiFiGeneric.cpp:355] _arduino_event_cb(): STA Connected: SSID: rs, BSSID: dc:2c:6e:27:c3:68, Channel: 1, Auth: WPA2_PSK
[ 31643][D][WiFiGeneric.cpp:931] _eventCallback(): Arduino Event: 4 - STA_CONNECTED
[ 31970][V][WiFiGeneric.cpp:369] _arduino_event_cb(): STA Got New IP:192.168.1.99
[ 31971][D][WiFiGeneric.cpp:931] _eventCallback(): Arduino Event: 7 - STA_GOT_IP
[ 31974][D][WiFiGeneric.cpp:996] _eventCallback(): STA IP: 192.168.1.99, MASK: 255.255.255.0, GW: 192.168.1.1
WiFi connected
IP address: 192.168.1.99
State changing from: 3 to 4
[ 35096][W][ESPmDNS.cpp:222] queryService(): No results found!
Active mDNS services: 0
Accepting connection
[ 35098][V][main.cpp:310] on_connected(): on_connected
[ 35112][I][ArduinoOTA.cpp:141] begin(): OTA server at: esp32-240ac4f84a6c.local:3232
State changed from: 3 to 4
[ 92904][V][WebServer.cpp:296] handleClient(): New client: client.localIP()=192.168.1.99
[ 92905][V][Parsing.cpp:122] _parseRequest(): method: GET url: / search:
[ 92908][V][Parsing.cpp:226] _parseRequest(): headerName: Host
[ 92913][V][Parsing.cpp:227] _parseRequest(): headerValue: 192.168.1.99
[ 92920][V][Parsing.cpp:226] _parseRequest(): headerName: Connection
[ 92926][V][Parsing.cpp:227] _parseRequest(): headerValue: keep-alive
[ 92932][V][Parsing.cpp:226] _parseRequest(): headerName: Authorization
[ 92938][V][Parsing.cpp:227] _parseRequest(): headerValue: Basic YWRtaW46VGticGZXaWZpMQ==
[ 92946][V][Parsing.cpp:226] _parseRequest(): headerName: Upgrade-Insecure-Requests
[ 92953][V][Parsing.cpp:227] _parseRequest(): headerValue: 1
[ 92959][V][Parsing.cpp:226] _parseRequest(): headerName: User-Agent
[ 92965][V][Parsing.cpp:227] _parseRequest(): headerValue: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/109.0.0.0 Safari/537.36
[ 92980][V][Parsing.cpp:226] _parseRequest(): headerName: Accept
[ 92985][V][Parsing.cpp:227] _parseRequest(): headerValue: text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.9
[ 93003][V][Parsing.cpp:226] _parseRequest(): headerName: Accept-Encoding
[ 93009][V][Parsing.cpp:227] _parseRequest(): headerValue: gzip, deflate
[ 93016][V][Parsing.cpp:226] _parseRequest(): headerName: Accept-Language
[ 93022][V][Parsing.cpp:227] _parseRequest(): headerValue: uk-UA,uk;q=0.9,ru-RU;q=0.8,ru;q=0.7,en-US;q=0.6,en;q=0.5
[ 93032][V][Parsing.cpp:254] _parseArguments(): args:
[ 93037][V][Parsing.cpp:237] _parseRequest(): Request: /
[ 93042][V][Parsing.cpp:238] _parseRequest(): Arguments:
[ 93047][V][main.cpp:81] handle_root(): Handle root
Guru Meditation Error: Core 1 panic'ed (LoadProhibited). Exception was unhandled.
Core 1 register dump:
PC : 0x40094bfb PS : 0x00060d30 A0 : 0x80094e50 A1 : 0x3ffb1af0
A2 : 0xffffffff A3 : 0x00000000 A4 : 0x0000001c A5 : 0x3ffb1b70
A6 : 0x00000000 A7 : 0x00000001 A8 : 0xffffffff A9 : 0x00000009
A10 : 0x00000000 A11 : 0x1d98ca9f A12 : 0x1d98ca9f A13 : 0x3ffc701c
A14 : 0x00060d20 A15 : 0x00000001 SAR : 0x00000017 EXCCAUSE: 0x0000001c
EXCVADDR: 0x00000013 LBEG : 0x4008b464 LEND : 0x4008b46f LCOUNT : 0x00000000
Backtrace: 0x40094bf8:0x3ffb1af0 0x40094e4d:0x3ffb1b10 0x400950cf:0x3ffb1b30 0x40114042:0x3ffb1b50 0x400e6b92:0x3ffb1b90 0x400d6fea:0x3ffb1bd0 0x401797a1:0x3ffb20d0 0x400dfbda:0x3ffb20f0 0x400dfc81:0x3ffb2110 0x400dfd67:0x3ffb2150 0x400dffa6:0x3ffb21c0 0x40179f81:0x3ffb2230 0x400e4a5f:0x3ffb2250 0x400d6906:0x3ffb2270 0x400ea055:0x3ffb2290
ELF file SHA256: e215afd9db32cb2f
Rebooting...
ets Jul 29 2019 12:21:46
With ESP32CAM rtsp does not connecting at all
Hi homonto,
Have you tried to erase the flash completely? Maybe there is some old config present...
I'm facing the same issue with two new ESP32-CAM modules. I'm using the ESP32-CAM-MB to power them.
Flashing them worked flawlessly, and I can set up my Wi-Fi credentials perfectly fine.
Without changing anything, I can access the stream and snapshot URL. Using RTSP via VLC crashes it most of the time. When changing the board over to the ESP32-CAM, I can see in the serial output that the RTSP server isn't starting because the camera isn't initialized. Because of that, I also can't access it via VLC. When opening the website, it again crashes.
As I said, I tried it with two new boards. And also tried reflashing them a couple of times, erasing the flash beforehand.
Hi Konrad,
I looked at the code for the status screen, especially after the initialization fails. I added a precaution in case the esp library function did not return a error string. This is available on the develop branch.
The reason the camera init fails is unclear; this is a standard ESP32 camera init. What does the error return? See the line in OV2640.cpp
printf("Camera probe failed with error 0x%x", err);
Anybody knowns if they're using another camera module?