Yangmin Shen

Setting NTP on my cameras worked for a while, restarting HA brings the problems back.

Problem remains in 2022.8.6 Frustrating to have all security cameras disabled on reboot. Kinda defeats the purpose.

I still have the problem after upgrading to 2022.8.7. I have Amcrest Cameras which have a problem with keeping the NTP setting applied, so while I can enable NTP on...

Assuming the feature desired is the ability to display test on the clock sent via MQTT, it can be implemented pretty passively so that folks not using MQTT can just...

This is a great little clock. +1 on the MQTT request above.t - it would be really nice to use MQTT to publish the text to be displayed as "advice"...

I see the same thing but it happens when I restart Home Assistant also. I have Turn on LEDs after boot/reset unchecked and I have a boot preset set. If...

I appreciate the tip about the workaround, but a workaround is not a fix. Shouldn't this issue remain open?

I am using ESPresense version 3.3.1 with a DHT22 and Home Assistant. About once per day, I get the following errors. The rest of the time the DHT22 module works...

Short of integrating with the g-code, a programmable cool down delay before shutdown would be nice.

Not sure. I generally don't like co-opting functions meant to serve a different scenario. A shutdown is very different than an abort. Would the abort timer apply?