Suprith Hattikal
Suprith Hattikal
Removing following deviations from scripts for Juniper, as these features are now supported on Juniper Devices - gNMI-1.10: telemetry_basic_check_test.go -> sw_version_unsupported - gNOI-4.1 : os_install_test.go -> sw_version_unsupported - gNOI-2.1: packet_link_qualification_test.go...
- Added delay between pushconfig and startprotocols to wait for ports to come up, added waitForARP to wait till the address resolution is completed - Refactored comments to comply with...
- In the script, lacp mode has been set to 'unset' for the lag bundle which leads to default value getting initialized for LACP mode - ACTIVE as LACP mode....
Since Transceiver thresholds are now supported on Juniper platform, removing the transceiver_thresholds_unsupported deviation for Juniper.
- Added the function configureInterface to configure the interface with required targetOutputPower and frequency. - Added functions opticalChannelComponentFromPort and isSubCompOfHardwarePort to get optical_comp name from port. - Changed the path...
- Changed the code to verify the 5th sample allowing values to transition after interface state changes. - Added the missing interfaceType configuration - Corrected the logic to get the...
- Corrected the logic to get the opticalComponentName, in accordance with the YANG documentation. - In the previous logic the code was to get the optical component name by traversing...
- Corrected the logic to get the opticalComponentName, in accordance with the YANG documentation. - In the previous logic the code was to get the optical component name by traversing...
- Added the deviation transceiver_component_state_flap_unsupported . - Corrected the code to consider fifth sample for verification of values after interface flaps, allowing values to transition. - Corrected the logic to...
Added deviation for operational-mode leaf and refactored the code to handle the same.