hadess

Issue #5 is about the SW5-012, which I guess is close enough. In any case, there's not enough information in your report to do anything about it.

Without a license, I'm not even allowed to distribute any changes I'd make to the code.

I'll make a note to delete my fork on that date then :rofl:

The way I understood it, the current best practice is to replace the builtin BIOS with one of [l_oliveira's region-free BIOSes](https://assemblergames.com/threads/region-free-bios-for-mega-cd-version-2-00.54254/).

``` $ grep UART /boot/config-`uname -r` CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y CONFIG_BT_HCIUART_ATH3K=y CONFIG_BT_HCIUART_LL=y CONFIG_BT_HCIUART_3WIRE=y CONFIG_BT_HCIUART_INTEL=y CONFIG_BT_HCIUART_BCM=y CONFIG_BT_HCIBTUART=m CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_ALTERA_JTAGUART is not set # CONFIG_SERIAL_ALTERA_UART is not set # CONFIG_SERIAL_PCH_UART is...

Silly me, Loic already answered my question months ago: http://www.spinics.net/lists/linux-wireless/msg126863.html I need the 8250_dw driver compiled and loaded. Building a new kernel now.

``` $ dmesg | grep tty [ 0.000000] console [tty0] enabled [ 1.142587] 00:02: ttyS0 at I/O 0x3f8 (irq = 202, base_baud = 115200) is a 16550A [ 1.143514] 80860F0A:00:...

No other modules needed, no.

@garnacho will have to test this when I deliver the tablet to him beginning of August (it's been reset and reinstalled).

I don't have this hardware any more, and my other BayTrail tablet can't install my preferred distribution. Read the above carefully and make sure you have the expected device drivers...