gururajkashikar

Thanks for the reply Harald. It never probed even a single point. As soon as open probe window, select the area to be probed, the attached screen is what I...

When clear is clicked, probing area with that 3d effect goes off as expected. When I create new, probing points appears but again the same issue. Run button will be...

Where is the "generate test pattern" box? I tried size from gcode. But did not work. Will try this again tomorrow morning. Thanks for the suggestion

Hi tarmon01, You were right. "Generate Test pattern" was checked because of which "Run" button was not enabled. Now I was able to probe and mill a sample PCB. Attaching...

Hi Harald, Thanks for your time to update these findings. I am using same bit for probing and milling. I was afraid of breaking the V shaped bit if I...

Hey Harald, I normally use a thick double sided tape to stick the copper clad sheet to my waste wood board and then place the wood on my CNC bed....

Great tips here. Harald: I'll try tomorrow with thinner tape. I was under assumption that each of the gcode file will have its own height map. Your explanation clarifies that...

Yeah Got it Harald. Another thing what I follow is, First time I zero all three axis, I store that Machine position using G28.1. Later any time I want to...

Hi Harald and tarmon01, I create another PCB today. Had a different experience. I used 0.08 as the depth for PCB milling/Etching. My probing started from Bottom Left of the...

Thanks for the update torman01. I think I need to buy 60 deg bits like you have suggested. What do you use for cutting board to its correct measurement.? Can...