Grigori Goronzy

In this day and age, it is a horrible idea to disable IPv6 system-wide. Nobody should ever recommend this! It should be quite easy to push IPv6 configuration to clients...

I think it should be enough to add command to OpenVPN to have clients add a route for all global IPv6 addresses. Add `push "route-ipv6 2000::/3"` to the OpenVPN server...

PipeWire (or is it WirePlumber) seems to remember the sink, though. After I assigned Noson's sink as fallback/default once, it started to work for new sessions. So this is a...

I don't know how this device works and I don't have any interest in adding support for it at the moment. If it isn't too much of a break compared...

I haven't really tested stcgal on OS X, so... - Try different baud rates (`-l`) - If possible, try a different USB UART device - Maybe it's a driver issue?...

These problems can be caused by bad drivers and certain buggy versions of pyserial. The latest version 3.01 of pyserial should be fine.

Other protocols definitely won't work, not much use trying. The BSL/bootloader on your device requires stc15. If flashing works with the VM, maybe you can get a dump of the...

@rfb This problem does not seem to be related, please open a separate issue. The stc12 protocol is quite a bit different. That said, the current Linux driver for ch340...

@Mrnt any changes with the current version of stcgal? Perhaps try with another UART, updated drivers or Linux.

Thanks, that is valuable feedback. The slight differences in the info packet are fine. The info packet includes some timing measurements based on the serial baudrate. These are used to...