Grzegorz Kwacz

This also happens in Polish.

What is the status of this issue? There is `GenerationLocation` param for all shapes, is there anything else intended to be implemented?

I have been experimenting a little, and came up with this design. The number of ribs and the waviness can be adjusted.   The Gridfinity Rebuilt wraps a sine...

I haven't tested any values in practice, and probably this is going to take me some time (as I don't have a printer at my place). If you want to...

I want to add that you can achieve this easily using Constructive Solid Geometry in FreeCAD. This is the power of having a Gridfinity in an actual CAD software instead...

This has been fixed in #109 which was merged in https://github.com/dracula/emacs/commit/ab09e8532c70bf73caed55ab9ce52ba3fb14583e so the issue can be closed.

You can easily achieve it using built-in FreeCAD workbenches, for example using Part workbench: 1. Create your baseplate/bin in Gridfinity Workbench 2. Switch to *Part Workbench* 3. Use the *Measure*...

I think the field we should be talking about is "Reference Parameters > Total Height", not "Gridfinity Non Standard > Custom Height". @Stu142 I think this field shouldn't affect generation?...

I want to add that you can achieve the incomplete baseplate easily using Constructive Solid Geometry in FreeCAD. This is the power of having a Gridfinity in an actual CAD...

> I might be misunderstanding but I believe you are suggesting this would make the label shelf less wide than indicated in the properties if there is a stacking lip....