GXAirCom
GXAirCom copied to clipboard
Multifunctional, compatible DIY aviation proximity awareness, variometer and messaging system with FANET+, FLARM and OGN support.
Hi, first companies seem to stop the production of the gy-86 module, MPU 6050 should also not be used for new projects anymore. ICM-20948 + baro or the [ICM-20789](https://invensense.tdk.com/products/motion-tracking/7-axis/ICM-20789/) might...
Adding a simple CI build action to be able to verify the build without having to use local resources. Also it should be easy to enhace the action to create...
Updating to build with recent arduino/esp32 framework. Including an update for the Onewire lib. Please note that I haven't tested the firmware on hardware yet, just made it build again.
I have a bit the feeling that the momentum is shifting towards these newer boards. It is certainly a big advantage, that one can buy them completely ready to use....
Hello, Thank you for this amazing project. I have an issue with the GY-86. I do not get data from it in the info page. It is connected and recognized....
There are 5 different firmware binaries at the moment: - [firmware_v4.14.0_nopsRam.bin](https://github.com/gereic/GXAirCom/blob/master/bin/firmware_v4.14.0_nopsRam.bin) - [firmware_v4.14.0_psRam.bin](https://github.com/gereic/GXAirCom/blob/master/bin/firmware_v4.14.0_psRam.bin) - [firmware_v4.14.0_sim7000_psRam.bin](https://github.com/gereic/GXAirCom/blob/master/bin/firmware_v4.14.0_sim7000_psRam.bin) - [firmware_v4.14.0_sim800_nopsRam.bin](https://github.com/gereic/GXAirCom/blob/master/bin/firmware_v4.14.0_sim800_nopsRam.bin) - [firmware_v4.14.0_ttgo-lora32-v1_SD_CARD.bin](https://github.com/gereic/GXAirCom/blob/master/bin/firmware_v4.14.0_ttgo-lora32-v1_SD_CARD.bin) I installed most of them on a Heltec Lora LoRa 32...
Hi, thank you for your efforts! I flashed the ready binaries from the .bin folder and everything works great. However, I have also cloned your last project in VSCode with...
Hi @gereic, nice piece of work, thanks for making it publicly available! I created my own device and flashed it with your SW. This week I did a test flight...
Hi, Thanks for creating a great FLARM/FANET+ solution. For the ground station, would it be possible to implement an option for feeding data to OpenSky Network? The following page has...