Jeff Geerling

Might try using the `iwlwifi` driver and something like this [EDUP PCIe Intel AX200 WiFi 6 Card](https://amzn.to/38yQhvk) instead...

@PixlRainbow Hmm, good find! I might have to dig back in with this card later—right now I'm going to put it on pause and work on testing a card I...

Video posted: [WiFi 6 on the Raspberry Pi CM4 makes it Fly! MORE THAN 1 Gbps!](https://www.youtube.com/watch?v=csI19aOJEik) (Note that the video doesn't dig into this card too deeply, but I may...

@AshleyPinner - Thanks! I actually found that a different transceiver supports all the speeds. An older one I was testing only did 1/10 Gbps.

If someone else wants to put in some work seeing if they can get this working, I'm open to it, but otherwise I'm going to chalk this card up as...

@jcdutton - See below: ``` $ sudo lspci -vn 00:00.0 0604: 14e4:2711 (rev 20) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0, IRQ 62 Bus: primary=00, secondary=01,...

@jcdutton - With the base Pi OS install I get: ``` $ modprobe rtl8821ae modprobe: FATAL: Module rtl8821ae not found in directory /lib/modules/5.10.35-v7l+ ``` So I'm going to recompile the...

Heh... just noticed that and am recompiling again :)

``` 01:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8812AE 802.11ac PCIe Wireless Network Adapter (rev 01) Subsystem: ASUSTeK Computer Inc. RTL8812AE 802.11ac PCIe Wireless Network Adapter Flags: fast devsel, IRQ...

@jcdutton Ah... silly me, didn't even think to look there: ``` $ dmesg | grep rtl [ 5.122777] rtl8821ae 0000:01:00.0: enabling device (0000 -> 0002) [ 5.181119] rtl8821ae: Using firmware...