Jeff Geerling

``` $ sudo lspci -vvvv 0c:00.0 System peripheral: Global Unichip Corp. Coral Edge TPU (prog-if ff) Subsystem: Global Unichip Corp. Coral Edge TPU Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-...

I'm going to go ahead and close this issue since the hardware is up—I'll leave any testing on the Seaberry board to a time after we can get https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/44 working...

Would be good to re-test on Pi 5, especially considering [Pineboards sells a bundle](https://pineboards.io/products/hat-ai-dual-edge-coral-tpu-bundle-for-raspberry-pi-5) with this dual edge TPU included, and they mention they've gotten it to work.

Discussion will happen here in tandem with https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/648 ;)

Right now I see on the Pi: ``` pi@nas02:~ $ zfs list -t snapshot NAME USED AVAIL REFER MOUNTPOINT ssdpool/backup/jupiter@autosnap_2024-04-27_03:15:00_monthly 0B - 10.9T - ssdpool/backup/jupiter@autosnap_2024-04-27_03:15:00_daily 0B - 10.9T - ssdpool/backup/jupiter@autosnap_2024-04-29_15:45:01_daily...

Checking today: ``` pi@nas02:~ $ zfs list -t snapshot NAME USED AVAIL REFER MOUNTPOINT ssdpool/backup/jupiter@autosnap_2024-05-01_00:00:01_monthly 27.1M - 10.9T - ssdpool/backup/jupiter@autosnap_2024-06-01_00:00:26_monthly 16.7M - 11.3T - ssdpool/backup/jupiter@autosnap_2024-07-01_00:00:14_monthly 0B - 11.6T - ssdpool/backup/jupiter@autosnap_2024-07-03_00:00:14_daily...

@onedr0p - Just be sure to [not taunt the ZED](https://openzfs.github.io/openzfs-docs/man/master/8/zed.8.html).

I just noticed there's a cron job added inside `/etc/cron.d/zfsutils-linux` with the following configuration: ``` jgeerling@nas01:~$ cat /etc/cron.d/zfsutils-linux PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin # Scrub the second Sunday of every month. 24 0 8-14...

Checking with `zpool status`, it looks like the last scrub was run on Sunday April 14: ``` jgeerling@nas01:/etc/samba$ zpool status pool: hddpool state: ONLINE scan: scrub repaired 0B in 0...

Ah... my estimate above was off—the schedule runs `At 00:24 on every day-of-month from 8 through 14.`, meaning on _one_ of those days, the if statement will trigger (`$(date +\%w)...