Jeff Geerling

@akgnah - Yeah, it's definitely an odd situation—usually there's at least an error message in `dmesg`, but here... nothing! I wonder if the switch is throwing something in the Pi...

This might be something worth opening an issue for in the https://github.com/raspberrypi/firmware repo—it seems like it could be related to https://github.com/raspberrypi/firmware/issues/1833

I have been testing powering the Pi via the barrel jack on the HAT, so there's still just one power connection.

@tltangliang - Yeah, it sounds like Radxa are not wanting to release the board until they are certain it can be made to work (which I'm 100% in support of!),...

I do think that has something to do with it, but I'm staring at the HAT right now sitting there tempting me to test it again... I just got back...

@mikegapinski From `lspci`: ``` 0000:01:00.0 PCI bridge: ASMedia Technology Inc. Device 2806 (rev 01) ``` And on the chip itself: ASM2806 B3NG7727A1 2022  Also @DanaGoyette I ran the `nvme`...

> Source your components directly or ask for a photo of the reel 😅 Ha, I'm guessing otherwise they might ship some old stock to clear it out! After all,...

See existing issue about Coral M.2 Dual Edge TPU support on Pi: https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/318

@MidnightLink awesome work! That's great to see it's been validated on the Pi 5. I have also broken mine out earlier today, and it was able to recognize both TPUs,...

@MidnightLink - I just ran through your instructions on a fresh Pi OS 12 install, and it worked like a charm, thanks! Follow-up question: Any idea if the [CodeProject.AI Server](https://www.codeproject.com/AI/docs/)...