Jeff Johnson

Did you try to boot the standalone application? Does it work? Here is the prebuilt standalone for VC707 HPC1: https://opsero.com/downloads/boot/2020-2/vc707_hpc1_pcie-standalone-2020-2.tar.gz Here is the prebuilt standalone for VC707 HPC2: https://opsero.com/downloads/boot/2020-2/vc707_hpc2_pcie-standalone-2020-2.tar.gz Did...

Sometimes we have issues on older versions and they don't end up getting fixed. Please try booting one of these PetaLinux builds for 2020.2 [Uploading v [vc707-hpc2.zip](https://github.com/fpgadeveloper/fpga-drive-aximm-pcie/files/6344520/vc707-hpc2.zip) c707-hpc1.zip…]() . They...

[vc707-hpc1.zip](https://github.com/fpgadeveloper/fpga-drive-aximm-pcie/files/6344524/vc707-hpc1.zip)

Strange. Are you using FPGA Drive FMC? What is the serial number?

That's OK I can see the serial number in your first photo. Can you try booting PetaLinux from JTAG with these prebuilt files for 2020.2 and 2019.2: https://opsero.com/downloads/boot/2020-2/vc707_hpc1_pcie-petalinux-2020-2.tar.gz https://opsero.com/downloads/boot/2020-2/vc707_hpc2_pcie-petalinux-2020-2.tar.gz https://opsero.com/downloads/boot/2019-2/vc707_hpc1_pcie-petalinux-2019-2.tar.gz...

On my setup, I have Vivado installed on C: and my project files are on E:, which is why I don't use the generic location for the Vivado script. Your...

OK I see the problem. I'll rewrite the script so that it checks if the build failed, and it cleans up the mess if it did fail as well as...

Hi Brett, I think it should be the other way around Brett. Are you using Vivado 2016.3? It should build fine with 2016.3.

The build-sdk.tcl should be run by Xilinx SDK, not Vivado. See the build-sdk.bat file for the command to run.

Sorry, the instructions are not clear for Linux users, I will fix this up. You need to run XSCT in the "non-interactive mode", ie. from the Linux command line. Don't...