failiz
failiz
I think that the matrix example is correct in 0.9.4. However, there is something strange in the PingPong example. All the views are connected properly based on the connection status...
Probably fixed in 1.0.2
Yes, with that change, the breadboard is created as a Bredboard object. However, I think we need to obsolete the part and create a new one as the moduleID has...
The only (small) problem is that I use the object type to decide the parts to grey out in the simulator. But we can leave this without fixing it and...
"I still don't really see an issue with the 45 degree rotation. Of course it's inconvenient to rotate everything, but if that's the way you want to use it, why...
Of course! And it is not a high priority bug, no rush.
Still an issue. See below:   The pad of the resistor is connected to a ground symbol in the schematic, but it is not connected to the ground plane...
I do not think we should add a copper seed symbol in the schematic. I would just add all the connectors that are connected to ground symbols in the schematic...
Still reproducible in 0.9.9. Remove imported label. 
