failiz

Duplicate of https://github.com/fritzing/fritzing-app/issues/4059 Current workaround from #4059: "Please try Fritzings Gerber and IPC export together with ZofzPCB. This will produce a 3d model of a Fritzing PCB, and it provides...

> the current example is > but most of the actual fzp files in core are of the form Did something go wrong here? It seems that there is something...

I would also remove the numbers of the connectors that there are in the svg file. I think they are redundant and confusing. First, these numbers do not match with...

> But I don't think it is anywhere near redundant? Just to be clear, I was talking about the small number in grey next to the connectors, not the message...

But most parts have these arbitrary numbers in the SVG file. See the NPN transistor: ``` ... 1 2 3 ``` The numbers 1, 2 and 3 are there as...

> * The unique constraint does not apply to names of the pins, e.g it is pretty common to have multiple GND pins. > * I agree with that, but...

> That said, I agree the text label in the svg for the pin number (which typically is one larger than the connector number to compensate for Fritzing pin numbering...

> How about adding / promoting a history tag? I am fine with that. It will make it easier to decide what to do when you modify a part. Currently,...

This thread is getting very long and as we are planning to add some parts to the core soon (new Arduino boards), it makes sense to settle on some guidelines...

Updated version, documentation, and policy changes separated from code changes. Please, check the changes and state if you agree/disagree. ### Part format: - [x] **adding / promoting a history tag**...