Edward Firmo

It is a BLE proxy, so if you have BLE devices nearby, those will use your panel to communicate to Home Assistant, and the creation of new entities will depend...

> what are the best settings for enable BLE on the nspanel? Use one of the add-ons available: - https://github.com/Blackymas/NSPanel_HA_Blueprint/blob/main/docs/addon_ble_tracker.md - https://github.com/Blackymas/NSPanel_HA_Blueprint/blob/main/docs/addon_bluetooth_proxy.md

Make sure you are not enforcing arduino (it requires esp-idf).

Wirelessly should be fine.

This is probably feasible... I will take a look later. The downside will be having an additional input on the super long list of inputs when setting up the Blueprint....

I'm a bit lost here. Your first logs shown an error compiling the firmware while running ESPHome compiler v2024.1 DEV, but then the last log shows info from a panel...

> in the long run first i would like to be able to track my smart watch in the house. This is [BLE Tracker](https://esphome.io/components/esp32_ble_tracker.html). You have to setup your watch...

If your scale is supported by Home Assistant, use that very same integration as if the scale was close to home assistant host. What proxy is doing is extending the...

So, if you have your panel working but with Sonoff screen shown, please capture logs from when you start your panel, wait like 15s, then press the upload tft button,...

Also, on the device's page, you might have a hidden component named Baud rate. Please enable that and when it is available, try all the different baud rates, just in...