Edward Firmo

Yes, I saw that and I'm now trying to measure again as I'm using a new measuring device, so I will replicate in all the different configuration... But I'm a...

> By the way, the manufacturer DWIN is very willing to provide screens for development and testing. I would be happy to work on an ESPHome component for this. Which...

I finally got my displays. I will try to find some time to play with this.

> the device is connected, once it's available on the mobile APP from the Hi link I'm pretty sure these sensors cannot connect to two different devices at the same...

> Have you success in integrations of this type of sensors using the BLE proxy over the Shelly 2GEN? Nope. I've also tried both passive and active mode on Shelly...

I've tested different scenarios and those are my results: LD2410B or LD2410C communicating directly to Home Assistant (without a proxy): OK LD2410B or LD2410C communicating via a ESPHome Bluetooth proxy:...

By the way, this communication via ESPHome proxy is extremely unstable and I gave up to that, I changed to this solution which is quite good so far: https://github.com/home-assistant/core/issues/90100#issuecomment-1483832015

> What about template sensors? > I have plenty of template sensors which may be “unknown” on HA startup. > As a result my log is flooded by these warnings....

I had the same issue and it was fixed when following the steps provided on #511

I got the same issue, and fixed following the steps provided on #511