Edward Firmo

Any chance you have the ribbon cable between the display and the main board not connected firmly? Or some short circuit in the board?

But then you are talking about an additional page and an additional user input. ☹️

So, you mean something like this, right? 

> so can I throw it away? No!!! Let's investigate it more... > that would also explain why I can no longer flash the display with the nextioneditor What happens...

On the editor the wiring is a bit different, are you aware of that? I mean, with the editor you have to connect Tx to Tx and RX to Rx...

- #399 - #426 - #831 - #1228 - #1233

Ok, then it really looks like a hardware fault. Please review the ribbon cable. Your panel will be able to show that page if it have power but no data,...

I would ask you to try the following so we can get more detailed logs: 1. In your ESPHome yaml: - Make sure `nextion_update_url` points to a valid url where...

> the rolling circle and "waiting for content" text. The rolling circle screen and the other screen you shared are not part of this project, so it was probably an...

This is not the same issue, as in your case the ESPHome version is shown, indicating the communication between ESPHome and Nextion Display is working. Let's take this in another...