Duane Voth

Workaround confirmed for Arch: ``` $ make clean $ LDFLAGS=-no-pie make test ``` passes with flying colors. ``` $ cc -v Using built-in specs. COLLECT_GCC=cc COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/7.2.1/lto-wrapper Target: x86_64-pc-linux-gnu Configured with:...

With gr-osmosdr 0.1.1-5 (current as of April 9, 2014 on Arch Linux) $ tpms_rx --source rtlsdr linux; GNU C++ version 4.8.2 20140206 (prerelease); Boost_105500; UHD_003.006.002-0-unknown gr-osmosdr v0.1.0-44-g0d10f5e9 (0.1.1git) gnuradio 3.7.2.1...

@protonic are you using python3? ping was written back when python2 was the most stable version.

Sandip, I assume you mean your laptop is WiFi connected and you are testing a remote host on the WiFi network. In this case, aborting with "No route to host"...

@dingrui37 it looks like your problem is your computer isn't properly configured for ipv6 (I would turn ipv6 off, reboot, and try again)

It looks like the multiswitch mininet backend is using ARP - is that why ICMP needs to be supported? Would there be any way to pre-load the arp tables in...

Ok, yes, I've set auto-control-plane to false, so I imagine I now need to do my own port routing. In the following output, can I assume the eth number for...

sorry: dev pipe -> developer's list of features to implement Specifying my own controller has helped, but there appears to be some default iface config in P4Host (p4_mininet.py) that I...

Should I have used 'sd*' in my description? The point is to be more descriptive _without_ naming an exact device (which of course could be wrong). I thought a capital...

😬 Well, first I have to apologize for a hot take made without sufficiently remembering the issue context ... Instead allow me to continue to opine that "Mass Storage Device"...