Ruben

Hi, Thanks for your quick feedback! I'm still having the same issue after downloading the newest release and starting from scratch. After installing the missing libraries, etc the "FB_RS485_EASTRON_SDM220_1.RequestMaster" error...

Thanks for the feedback, yes I started completely from scratch so RS_485.PRG is also updated. Seems like you are using the "ecockpit" version and i am using Codesys. In the...

Yes it's indeed that part of the code. I will try removing that part and let you know the result asap :)

confirm

I received my Velux shutters a few weeks ago. I applied 24V to them and they work (swap polarity to change UP/DOWN), however my shutters stop before they reach the...

> pyocd: 0.36.0 ubuntu: 22.04.1 > > Board 1: nRF9161 feather (beta) with RP20240 as probe, circuitdojo.com Board 2: nRF9151 Connect Kit with nRF52820 as probe, makerdiary.com > > pyocd...

> If you use the circuitdojo.com Board, [probe-rs](https://probe.rs/) works very well. Unfortunately not, i have the makerdiary nrf9151, probe-rs does not seem to work there I tried: nrfjprog --program build/merged.hex

I get: Error: Connecting to the chip was unsuccessful. Caused by: 0: An ARM specific error occurred. 1: Error using access port FullyQualifiedApAddress { dp: Default, ap: V1(0) }. 2:...

Upgrading Pyocd resolved the issue(0.35.1 to 0.39.0 resolved it) , thank you! before upgrade: `pyocd load --target nrf9160_xxaa --format hex build/merged.hex 0001425 W nRF9160_xxAA APPROTECT enabled: will try to unlock...