Doug Scott

I know it has only been 18 months since this was first asked about, and I see the current firmware is showing the same web view option, is there any...

I can get a ping response from it, it appears to connect using telnet, but, does not respond to g28 or any other GCODE commands. Which version of firmware you...

Maybe not all mks users, but all SF3D users will appreciate it. Cura may be an easy slicer to use, if you have been using it solely for years, but,...

I am having the same issue. The 3dtouch just flashes amber/red/orange colour all the time. Online it says that means it has an error. I used the "doesn't do anything"...

> Use 3D TOUCH for MKS SGEN is same as MKS SGEN_L motherboard, I has check your configurati.h file and i find it have not config 3D TOUCH partment and...

> Works for me now. Just don't use the UART for tmc220x and that will solve your problem. I'm going to switch to the Sgen L. I have the MKS...

I think I have finally figured out the 3DTOUCH hardware connections for my MKS SGEN LPC1769 v1.0 mainboard. Note that this board is NOT a _L type board. The 3DTOUCH...

> So, your bltouch is works when wiring is OK? As it stands right now, the 3dtouch cycles twice then stops with the blue and amber LED on solid when...

> @makerbase-mks > You can try to use command control it, for example, M280 P0 S10 and so on When I enter that command nothing happens. Use pronterface returns nothing...

forgot to include the other config files I editted. This one contains all of them. [config0916.zip](https://github.com/makerbase-mks/MKS-SGen/files/5234699/config0916.zip)