Anthony Doud
Anthony Doud
> Arm length is indeed yuge for the bike Yuge but appropriate, correct?
Thanks as usual @eMadman !
This might not be a hard thing to fix. I think what could be going on is that the first service that's advertised is the Cycling Speed and Cadence service...
Give this firmware a try. All I've done is disable this function so that it doesn't attempt to pass commands from Zwift to your bike. https://github.com/doudar/SmartSpin2k/blob/c75f2e3ad5319e29fbdd0946b2caa2757839ffaa/src/BLE_Client.cpp#L543 Follow these instructions for...
Also, on the next log, if you could check "enable BLE RX Logging" that would be great. It's a dumb setting anyway :)
> So I disabled Automatic Updates and rebooted to make sure it was still off. Then updated the firmware and rebooted. Still showed the same `23.12.29-develop` version so I updated...
@Codelica #518 should finally fix this. Here's a binary. Please let me know. [firmware.zip](https://github.com/doudar/SmartSpin2k/files/13998065/firmware.zip) Have a great day!
fixed by #518
You did a fantastic job collecting logs for this - Thanks! Could you send one log from the current develop firmware with Torque Table? That would help me determine the...
Also...Looking at this more - is there any chance that the stepper motor is losing steps (slipping) when you go to higher resistance? It could be that your mechanism is...