Anthony Doud
Anthony Doud
> why simple don't use the target resistance value instead of the peloton target resistance? it will simplify everything since i'm alraedy thinking in 32 levels for the echelon :)...
It is reinventing the wheel I'll give you that. It's probably the way we should have been doing it all along as a lot of what the custom characteristic is...
> > yes but it could be complicated to the FTMS thing for all the bikes, unless you don't want to add all the bike profile of QZ to SS2k...
Okay - so @marklogan17 , I'd like you to still upgrade firmware if you can and then lets get this stuff sorted out with the custom characteristic. It may not...
> Sorry guys, I was doing someone's review :) So I can upgrade the firmware and test the current config. I'm not testing the new peloton setting for now? Not...
Just below that is also: ``` /cam/{cam-short-name}/pos=x Performs a PTZ command on the specified camera, where x= 0=left, 1=right, 2=up, 3=down, 4=home, 5=zoom in, 6=zoom out ``` It would be...
Sorry for the suggestion of this feature creep, but this would be a killer app for extremely cheap PTZ cameras like the Amcrest ProHD.
Well, returning to the original location is easy. If the object is no longer detected or hasn't moved in X number of snapshots, return to home position: `/cam/{cam-short-name}/pos=4` For tracking...
Thanks for the tracking issue! Btw, I don't believe the "scan to connect" shifter button holding feature is required anymore and could be deprecated. The new firmwares are constantly scanning...
Are these finalized and working?