HeadTracker
HeadTracker copied to clipboard
dlktdr
This project is built to record the orientation a FPV headset to allow the camera on your RC to follow your head movements.
The GUI application is very similar to a classic editor of application specific data. Classic editor has memory buffer. User can load his data there, modify it using various controls...
Modify the window of the first step:  1. Add the message as on the screenshot above. It should be in a big enough font be and bold. 2. Rename...
This should be changed so that the old gyro calibration values are used and output isn't ever disabled. If a reboot is needed mid flight I would want the output...
Add some setup templates for the basic setup types. Should help alleviate some setup confusion. 1. Open/EdgeTx PPM/SBUS (80hz) - 4ch PPM, 12ms frame. Tilt-1,Roll-2,Pan-3, Bluetooth(Head) 2. Open/EdgeTx Bluetooth PARA/CC2540...
Recently added a request to switch to Coded PHY mode for the Bluetooth connection to help with range. So far works amazingly when going Arduino -> Arduino. Nice and smooth...
Include the option to enable/disable output on a long proximity sense.
Idea from another head tracker project. https://cdn.discordapp.com/attachments/827622724565467199/901051561508225044/unknown.png Add the ability to reset center by tilting your head full one direction and full the other within a certain time will reset...
Additional thought on allowing wireless joystick output. Add an additional Bluetooth mode that sends the HID joystick device over Bluetooth LE. Links here for reference, https://www.ti.com.cn/cn/lit/an/swra715/swra715.pdf?ts=1648830563603&ref_url=https%253A%252F%252Fwww.google.ca%252F
Note to self... Rebooting right after a calibration solves this but It should be causing a reset in the software to re-find the initial orientation. need to check if this...